Which spyder frame would work the best for this conversion? Which frame would I be able to achieve very high rates of fire? Thanks
Skywalker
Skywalker
-
Dust Green X-Mag #315
ULE body w/ dual Kila V2 detents, X valve w/ LX, Y-grip w/ Dye grips, ULT, Omega rail, Stainless Steel Freak Kit.
My Feedback- http://www.automags.org/forums/showthread.php?t=165428 -
If its a recreational gun, get the new spider grip with the dual trigger thingys, or just get a normal ESP rame and put a 36bps tboard in it
If I see one more "What happened to smart parts" thread, I will kill Adam Gardner. You have been warned. -
esp 3.0 or somethingComment
-
A spyder E- FrameComment
-
Get any Spyder frame, then put a Morlock board in it![Something Cool is Here]Comment
-
-
Hey Skywalker,
Here is my "how to" thread with instructions, pics and videos for doing your own spydermag. Check out the second video. I would recommend just getting the ESP frame and putting a T-board in it.
hope that helps.
Bryan
Phantom Regiment
Team Mag Daddies
CPPA Member
Sponsored by Paintball Quest
Primary Marker: Black Alias
Secondary Marker: XSF SpyderMag
X-Valved (of course) with Level X and ULT
Black Center Feed ULE with Halo B
Logic milled rail, Evil Pipe kit
68/4500 CrossFire @ 850 PSIComment
-
T Board
i for one can recomend the tboard. Its a solid built board. I have it on my spyder and can out shoot the reloader b on the lower levels. But my gun had a hard time handling the force feed so i bought a tac one to go with my loader. You will not be sorry with a t board. you will just have to figure out which setting you want after you play with them a while. There is also a upgrade chip for the t board that makes it full auto and several other nice features. The board and the upgrade chip are less than 100 bucks.Comment
Comment