can you put eyes into an emag with the stock board? i was just thinking that the xmag has the same board(i think) and it uses eyes.
-
PBnation feedback
adt501:
scientific studies have been done, and their conclusion: the color purple will not only reduce your skills but reduce your sex appeal as well
:dance: -
Yes. You can do it.
You'd need to mill the gripframe, rail and whatever ULE body you use. (You'd have to mill a hole if you use the twistlock barrel in the barrel itself.)
And make sure you have the appropriate holes for the on/off switch and software to run it.
Talk to Brad at www.paintballmaxx.com -
check out the workshop forum, it might help you out.
My old friend bajaboy knew how to do this. I believe he had and sold 3 ACE'd emags. Not an easy job for somebody that isn't good at milling.I knew not what I did but am now edumacatedComment
-
Yes , Its called a "ace board" it can be fitted for the emag. Your rail and body will need to be milled and you will need a software what suports the ace board. Theres not really a need for the ace if you have lxOriginally posted by LawnGnome7
Comment
-
having the ace board on my sfl, i dont use the ace, but i find that the switch instead of the yellow pin works better for turning the marker on and off.President Of the UW-Madison Badger Ballers
AO Feedback
1 of 35 SFL Emags VV02746
Silver Karta/Logic RT Winner:GOTM Most Bling for December VV04971
Sydarm SY00715
Nelspot (under restoration)
Comment
-
thanks for all the help, ill look into paintballmax
where is the switch on an sfl or x? pics if you have em would be niceOriginally posted by mag/cocker loverLast edited by LawnGnome7; 11-30-2004, 09:32 PM.PBnation feedback
adt501:
scientific studies have been done, and their conclusion: the color purple will not only reduce your skills but reduce your sex appeal as well
:dance:Comment
-
-
well, I know that my emag board has an option for ACE, i dont use it cause i dont have ACE..Comment
-
That's because from 3.x software and above, AGD has used a unified software. Everyone gets the OPTION for the ACE now.Comment
-
could be wrong,
isnt the software limited to 20bps w/o ace but unlimited w/ ace?Comment
-
Wrong.
It's 20 and 20. (on/off)Comment
-
problem is that AGD is out of ACE boards...I can do the machine work but the boards are now the problem.Red/black faded Emag...serial # Brad Nestle (really it is)
Matching faded Warp Feed
4500/68 ci Flatline
Mag CF11472 soon to be a stock feed mag pump. The serial number is also my birthday, 1.14.72.
I love my job!
Brad "Q" Nestle
Airgun Designs Tournament Tech
Paintball Maxx
Houston, Tx
713.983.9190
Ron Fieldhack, Rest in peace my friend.Comment
-
did they stop making them too, or just have none in stock?PBnation feedback
adt501:
scientific studies have been done, and their conclusion: the color purple will not only reduce your skills but reduce your sex appeal as well
:dance:Comment
-
Since they aren't making the Xmag anymore, they don't need to make the ACE boards for it.Red/black faded Emag...serial # Brad Nestle (really it is)
Matching faded Warp Feed
4500/68 ci Flatline
Mag CF11472 soon to be a stock feed mag pump. The serial number is also my birthday, 1.14.72.
I love my job!
Brad "Q" Nestle
Airgun Designs Tournament Tech
Paintball Maxx
Houston, Tx
713.983.9190
Ron Fieldhack, Rest in peace my friend.Comment
-
thas what i figured, there is no other board that will work?
and how much would the milling be?PBnation feedback
adt501:
scientific studies have been done, and their conclusion: the color purple will not only reduce your skills but reduce your sex appeal as well
:dance:Comment
Comment