Cutting the back off of Dye stickies?

[afultz075]

I've been thinking of cutting the back part off of my Dye Sticky 3's so I don't have to take the rail/ASA off my Viking to change the battery. I'm wondering, has anyone done this before? Is it easy to do a nice clean job of cutting it?

[Flow_Tech]

i wouldnt do it..cause if you mess up,then you have some ugly grips..but its really easy if you want to try it..just use a REALLY sharp exacto knife.

[68magOwner]

not hard to do, just take an exacto or a straight raizor, and cut it in a clean slice

[rkjunior303]

I did the same thing on my Viking.. I just put a slice down the middle of the back of the grip, so if I need to I can pull it open to get to the battery

[afultz075]

That's an interesting idea, but don't the two halves of the back of the grip try to jut out or anything?

[tippmannsniper-]

i did it because i was to lazy to take off my uni so i just cut the back out of my grips(stickie 3s) and now their great not as much grip feeling but its a whole lot easier!!!

BUT USE COOKING SHEARS OR RREEAALLYY SHARP SCISSORS(sp?)

[LeatherPants]

I've done it on all my markers. Just get a pair of sharp scissors. You can see a clear line to follow where the hard plastic ends on each half. It's simple. If not take it to a local school and have the 5th grade art class cut it for you.

[SpecialBlend2786]

Yeah you just need one clean cut down the back and you'll be able to slip the grips off the frame without having to take the rail off your gun

[-=Squid=-]

Mine stretch enough to not require full removal, whilst remaining uncut.

- Goro

[Evil1]

I cut the back of the grip off on my alias and took a big piece out of the side so you can see the lcd screen and the grip is still very functioal. I cut it using an exacto knife with the scalpel like blade attachment.

[rkjunior303]

That's an interesting idea, but don't the two halves of the back of the grip try to jut out or anything?

nope, i dont even realize it.. since its rubber, it snaps back into place...