apoc2k and hose

[mag88888]

im about to buy a apoc2k. i have the stock hose and stuff from my rt ule custom right now. do i need any specail hose or things to hook it up? please quick!

[mag88888]

cant get hose off asa

i was just checking out my hose and cant get the elbow thing attached to the hose off my asa. i already took the asa off the grip but i cant twist it out. help?

[mag88888]

jeees people answer!!!!!!!!!!!!

[mag88888]

holy poop hurry. i need to order now!!!! is there any special stuff i need? fill nipples anything?!!!!!!!!!!HURRY!!!!!!!!

[Glickman]

double thread much?
double post much?

you will need a wrench to take out the 90* elbow

fill nipple should be on the regulator, and tanks usually come with everything ready to go, you might need a elbow and/or cap for the asa though

[mag88888]

yes this is a double post. i freaked out cause i need to order now so i dont have to wait after xmas for package. special elbows?

[mag88888]

is the stock elbow i have on my rt ule custom ok for the apoc2k?

[Glickman]

answered on one of your other threads....

[1977FordBronco]

I just got the Apoc a week ago and here is my hose set up. I used the stock ss hose and 90* elbows, and bought two quick disconnects, and another fill nipple (one comes on the Apoc). And ran it like this A slide check works well also. The QD is necessary to bleed the pressure from the valve otherwise you have to drain the tank to take it off the rail! Pictures below:

[1977FordBronco]

Oh yeah. And order extra reg seats from Air America. That is the seal between the two halfs of the reg. Every time you take the reg apart you MUST replace the reg sear. If you dont' you might get a leak, but most likely you will notice that your input pressure will slowly spike up to 1200 psi at which point the burts disks...well...burst. http://www.airamerica.com/store/prod...d815dc43340388