J&J Ceramic Barrel

[MarkM]

because, at least on the stiffi's, the porting holes are a bit sharp (basically a hole drilled into the carbon fiber weave) , and pieces of soft squeege's such as battle swabs tend to tear and get stuck in the porting. This causes obstructions in the barrel and can block the porting all together. It also tears up your squeege quite nicely.....

Most straight shots use some sort of washer, which is not soft enough to get into the porting and get stuck.

as for a straigt shots use in angels with cops or sensi.....just be careful and dont jam the squeege all the way in

Ok that makes sense......and as for the Angels it is a bit pointless not squegeeing all the way down as you will leave paint around the Sensi/COPS rod and towards the bolt so you have to use a battle swab if you want the paint cleared away and the Sensi/COPS rod intact..

To keep this on topic since I started a thread jack of a kind. The J&J are good enough I had one on my Shocker but since it was a prototype and a very small bore I never used it that often but on the occasions I did it shot great.

[Gabriel]

I had a edge kit for my old minnimag body and it worked well light and quite. I hae a friend that is looking to sell his Edge kit automag threaded if interested?

no thanks, looking for spyder threaded. my project gun right now is a spyder imagine. wanna hear about it? Ok, i'll tell you

Spyder Imagine
Female PP Stabalizer
MacDev Gladiator
AKA Tornado Valve
Shocktech Bolt
50g switch
ACP Magnum AP Striker
ACP Slasher trigger

Thats the plan, she's muh behbeh. I'm calling her the longbow. Long live the knights of the old spyder!

lord Gabriel the Jacob

[SpecialBlend2786]

no thanks, looking for spyder threaded. my project gun right now is a spyder imagine. wanna hear about it? Ok, i'll tell you

Spyder Imagine
Female PP Stabalizer
MacDev Gladiator
AKA Tornado Valve
Shocktech Bolt
50g switch
ACP Magnum AP Striker
ACP Slasher trigger

Thats the plan, she's muh behbeh. I'm calling her the longbow. Long live the knights of the old spyder!

lord Gabriel the Jacob

if you're calling her the longbow i say you get a longbow for her

[Gabriel]

if you're calling her the longbow i say you get a longbow for her

I was calling her longbow because im trying to stay with the middle age theme (knights of the old spyder). Although I guess I could go japanese, as the "jedi knights" all somehow knew ju-jitsu. So we'll see. maybe Landsknechte (a long two-handed sword used by german mercaneries), Longbow (the special weapon of the Brittons), or Zatoichi (a walking-staff Katana).

[Automaggot68]

Edit, My mistake, I had the Conquest and gladiator mixed up.
My Bad, dude.

no thanks, looking for spyder threaded. my project gun right now is a spyder imagine. wanna hear about it? Ok, i'll tell you

Spyder Imagine
Female PP Stabalizer
MacDev Gladiator
AKA Tornado Valve
Shocktech Bolt
50g switch
ACP Magnum AP Striker
ACP Slasher trigger

Thats the plan, she's muh behbeh. I'm calling her the longbow. Long live the knights of the old spyder!

lord Gabriel the Jacob

[GT]

very cool barrel, I have had a few on different guns. They came out with a ceramic edge kit.

[peewee]

Have had several best bang for the buck hands down in my personal opinion. Love em.

[Gabriel]

very cool barrel, I have had a few on different guns. They came out with a ceramic edge kit.

where can I get the ceramic edge kit, and how much is it?

[peewee]

http://www.paintball-discounters.com

J&J direct also

[Gabriel]

thanks!

[thecavemankevin]

first call has the aluminum one for 70

http://firstcallpaintball.com/detail.aspx?ID=602

[Halliday]

Good barrel for the money. Light. Never really tested it's self-cleaning properties. Watch the bore size, it might not always fit your paint.

[jewie27]

Does anybody have any experience with this barrel? How well does it self-clean? Also, don't carbon fiber barrels do that self-cleaning stuff too?

My friend bought one and likes it because it always stays clean after a ball break.

It is coated with teflon on the inside, which keeps paint from sticking to it.

[Automaggot68]

My friend bought one and likes it because it always stays clean after a ball break.

It is coated with teflon on the inside, which keeps paint from sticking to it.

It's not coated, it's impregnated.

[SpecialBlend2786]

It's not coated, it's impregnated.

stfu nOOb!

jk, yeah you're right.