Tell me Your Loader and Warpfeed Setup

[Little_Ho]

Hi Guys,
iam just wondering something. If you have an Warpfeed. What Loader do you use.
I dont wanna do a Poll, so please post it.
This Thread have two reasons for me. First i look maybe for a new Loader and second your choise. Maybe you write down how fast you shoot and if you have any mods on your Warp.

I personel use a Tripod which is keeping up with me and the Warp, had a Revy befor. But the Tripod seems to me a little Faster+ the Changeable Hopersize.

My setup is, X-Valved, Warpfeed bodied, Chimera Framed all Black Mech Mag.

Little_Ho

[BD_Paintball]

my brother uses a warp and rev on his WASed imp. the warp has 12v mod on it. my friend who also has an imp uses a warp with a reloader b on it. and he also has the 12v mod. both walk the guns very fast with the I-frame. with the rev you will not be able to keep up long strings. but with the relaoder it will keep up with the high rof. I used to have a warp with 12v rev on my mag but now use a reloader b on my imp.

[Miscue]

Warp + HaloB

[Tyger]

Richochet AK, normally. The warp doesn't starve becasue of it, and it's the best ergonomic fit I could find under $100. Then again, I don't shoot more than 8-10 BPS anyway, ever.

I say normally because when I warp my Phantom a revvy fits just fine.

-Tyger

[mcdkid]

little_ho, those 300 rnd revys not working for ya?

[Little_Ho]

Hey mcdkid,
thats the other Guy in my Team.......Captain Morgan (Mike).
He uses 300Rounds Revys on his warp. I use the Tripod. I was just thinking maybe getting a new setup (mainly Loader). But i will see i guess.

Hey are you Guys coming on the next event in Feb?? Down at Low Country PB in Georgia??

If you do then we will see us. You Guys can come buy our camp.....


Little_Ho

[Creative Mayhem]

i use a Qloader fed warpfeed...




















okay... no i don't, but don't you think that would be funny


Okay, seriously now...

on my xmag i have an intelli-linked Warpfeed with Havoc_Online's Bigcell and on/off mod, topped with a HaloB with RIP The feedtube come almost straight up from the outlet into the 90* elbow into my warp module.

on my minimag I have the same warpfeed setup by Havoc_Online, linked to my intelliframe, topped with a 12v revvy. I have the feed tube running through the hopped for a nice tight setup.

[aovboy]

I have a Warp with a Halo B. Feeds fast, but the Halo is just too heavy for my tastes. Too bad I can't get about the same feed rate without all the weight, yeah?

First day of using the Warp today, actually...loved it. I'ma be using it for a long time.

[LudavicoSoldier]

I use a Egg2 with my warp. I use a PudBudz bracket, and it puts the center mass of the hopper/warp in line with my y-grip. Feeds plenty fast for me.

[Little_Ho]

Hi

well i forgot i use both of my Warps Intellifeeded. I have a Classic RT, XMag and a Mini with ReTro. All these Guns are working with either of the Warps. Ill do the 12V mod in the next couple of Days, so my concern was to keep up with the speed. I used to use a 12V Revy. I switched to a Tripod system because it is a little faster. But dont know if they can keep up with the mod.

Little_Ho

[-Tab]

i used a 12v revvy w/ x-board on my warp. worked really well, but i didn't have a gun that would come close to outshooting either.

we put an egg on a warp and it was horrible. it was the exact opposite of low profile. it completely defeated the purpose of the warp, but that's just how we had it set up. i'm sure someone out there has an ingenious way.

i think a halo b might be outdoin' it. a warp feed can already feed incredibly fast.
i would go with an something along the line of a richochet.



i no longer use a warp.

Vert feed>warp - IMO

[aovboy]

i think a halo b might be outdoin' it. a warp feed can already feed incredibly fast.

That was the mentality I had. I stuck a Revvy on there just today, and managed to have a good deal in lag time. I suppose so long as you won't need to do a string of more than 15-20 balls, you'd be fine, but if you really wanna lay it down, I don't think a normal Revvy is gonna keep up.

'pends on how you play, I suppose.

[trains are bad]

I have a Warp with a Halo B. Feeds fast, but the Halo is just too heavy for my tastes. Too bad I can't get about the same feed rate without all the weight, yeah?

I refuse to run a halo. Too heavy.

My setup now is a 12v warp, intellifed. The hopper is a richochet AK with no board or battery. I have the hopper motor wired paralell with the motor of the warp, and it's connected with a plug. I have no problems with this keeping up with my emag.

As noted at high ROF, LONG strings it will slow me down, maybe, just a little, barely noticably, but I have eyes, and I don't really shoot such strings. I don't carry much paint. But realize at 12v the hopper motor is being over volted so it spins faster than normal.

And a gutted AK weighs exactly 9 ounces.

I'll also add that on any legal mechanical mag, the 12v mod is pointless.

[68magOwner]

when I had a warp- revvy on top, but, that was on a mech, would need something much faster now

[professor_chaos]

Before I converted my rt custom I was using a z-board egg with stock warp. Now with the emag I will be using the Z-board egg with (snertz) 12v mod, led, and on/off switch.