Intelliframe compatible w/ the RT?

[PigusRT]

Hey guys can you help me out? I was wondering if the Intelliframe was compatible with the RT? Not the RT Pro.

Thanks!

[ben_JD]

Not quite...AGD will have to drill out a hole in the back of the frame, but you can order them from AGD direct. It's just a little customized.

[Paintchucker]

Special Milling...

First, RTs and RT Pros do not use the same body rail. RT Rail feeds the gun thru the rail and that funky banjo bolt field strip screw. The RT Pro and Emag have a body rail more similar to the traditional mag only bigger, and the air goes in thru a port on the side of the valve.

Because of the Banjo Bolt Screw, the trigger frame of an RT must be drilled out wider for the field strip screw than that of a traditional trigger frame.

FooTemps, man I love ya to death little guy! But if you don't got the guns, please refrain from giving out advice on them...

[PigusRT]

Thanks Ben_JD and Paintchucker. I knew there was something that had to be done due to the Banjo Screw.

[BlackVCG]

If you need to drill it out yourself, use an 11/32" bit and a drill press if possible.