How much would it cost to convert a classic mag to a bump mag? I am think I would like a pump, and since I have the classic lying around I put two and two together.
-
-
You need a pump body and a rail with a pump slot.Originally posted by Conversekidz
"Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats." --Henry Louis Mencken. -
you need a pump kit if you know where to look you can find them afordable, otherwise on ebay they go for around $150. then you may or may not need a pump rail and body with a pump slot. those if needed can be milled for $25 each.GearAGD - "[/tom kaye shakes head in disbelief]"
RT Mag / Minimag / Pump Mag / Sydarm / ULT / Qloader / ELCD / RPG / 1989 Sterling / 2x F2 illustrator
Feed Back HereComment
-
Whats all in a pump kit?Comment
-
a pump kit comes with
1 pump handle
1 pump rod
1 two piece pump bracket
1 wave spring
and the hardware to put it on the marker
Comment
-
I have an oem rail, and, that is milled from the factory with a pump slot. lmkComment
-
the hardest thing to find is going to be the pump kit and the body. there are rails around but the milled body and the kit will be hard to find. i got lucky and got my pump mag from a kid that was local. if you are serious about building one 1st find a pump kit and a body then look for the railMy Guns: chrome and black pump mag
-black 2k sniper 2
-32* vision imp with ups, ECS, reloader B
-was'd imp w/ i-frame and all ups, warp feed
-88/3000 and 48/3000 tanks
AIM: Paintball1084
my feedbackComment
-
check the dealer forums, we mill the bodies and rails
either stainless or ule bodiesComment
-
GearAGD - "[/tom kaye shakes head in disbelief]"
RT Mag / Minimag / Pump Mag / Sydarm / ULT / Qloader / ELCD / RPG / 1989 Sterling / 2x F2 illustrator
Feed Back HereComment
-
so the $10 pump handle and rod that tom was selling on ebay was a good deal then? I would just need a rail that would work, and a body and I could have a pump gun.
If I don't end up selling the gun, I will definatly make a pump. I think it would be good to get back to my paintball roots and play with a pump for a while. I learned how to play on a bushmaster pump when I was 10ish, i'm 23 now
Comment
-
the things on ebay was just the handle and the rod. u didnt get the wave spring or the part that bolts on the rail.My Guns: chrome and black pump mag
-black 2k sniper 2
-32* vision imp with ups, ECS, reloader B
-was'd imp w/ i-frame and all ups, warp feed
-88/3000 and 48/3000 tanks
AIM: Paintball1084
my feedbackComment
-
last i saw, full pump kits went for over 100$ on ebay. i contacted the guy and he said he had sold them all.
good luck finding a full kit.
Florida peeps...step up!!
My Feedback
"They do not preach that their God will rouse them a little before the nuts work loose."
-Rudyard Kipling: The Sons of Martha
"To understand the Automag, you have to think like an air molecule."
-Sparky MelberComment
Comment