Warp on a freestyle?

[Conversekidz]

Has anyone seen a warp on a freestyle? I am trying to figure out which setup i should do, its either going to be a halo B, or a warp with a revvy.

If I got the warp I would want to do the 12 volt mod so it would feed faster and keep up with my freestyle.


If someone has a warp mounted on a freestyle I would like to see a picture, and also know how its working for you.

[Duzzy]

Why not use a warp and a Halo? Getting the 12v mod for your warp when your loader will only feed 13bps (I believe the Warp mod will kick it up to around 20 bps)? If you do get a warp a dealer in the forums has warp necks that decrease the profile check them out. Good luck with whatever you do. Sorry that this really has no relevancy to your actual question.

[trains are bad]

12v warps feed something sick like 30. lets just say I have never found a hoppor that could keep the wheel full all the time.

halos are too heavy, I have an apache on mine.

[Conversekidz]

halos can keep a steady 20bps stream.


Can your warp and apache do the same?

[SpecialBlend2786]

halos can keep a steady 20bps stream.


Can your warp and apache do the same?

it'll stream a steady 20 bps for 7 seconds sure.....then time to reload.

[Conversekidz]

thats good enough for me.

I'm going to get a warp and a apache LCD. Found place that sells the LCD brand new for $50!!!!!

[SpecialBlend2786]

I'm going to get a warp and a apache LCD. Found place that sells the LCD brand new for $50!!!!!

good deal. I think thats the price i got mine for. When you get it if it doesn't have the new style impellers, give Ricochet a call to get the upgrades for the Apache

[Conversekidz]

i'm going to end up spending the same amount of money as if I bought a halo, but my gun will be short now


Freestyle, with warp, and a peanut tank. Can't get much smaller of a package.

[Chronobreak]

warp 9 vlt 16 bps~
warp 12 vlt 26 bps~

these are est actual speeds vary depending on setups and hose lengths etc etc

mine feeds around 13 maybe i find it lagging after a long stream sometimes so il be getting a 12 vlt mod to pep it up.

i also use a halo on it.

your gonna want to find a no rise or soemthing for the FS to keep the profile down

[68magOwner]

i was able to outshoot my apache with my old imp, teammates timmy, other teammates cocker, preety much anything, BUT, it was faster than necessary, just not any 20bps.

[Duzzy]

your gonna want to find a no rise or soemthing for the FS to keep the profile down

Or you could Obey Me!!!

Luke also has something about putting a Halo on a warp Here!

*EDIT: Last post on the page*

His disconnect looks cool as well so if you should ever want to take the warp off and use a hopper...

[mag88888]

http://www.actionvillage.com/is-bin/...p-feed-loaders

those say 20 +bps. is that true? do hey have a 12 volt mod? how fast are the ones on AGD's site? where can i find the 12v mod? what is it?

[Conversekidz]

warp 9 vlt 16 bps~
warp 12 vlt 26 bps~

these are est actual speeds vary depending on setups and hose lengths etc etc

mine feeds around 13 maybe i find it lagging after a long stream sometimes so il be getting a 12 vlt mod to pep it up.

i also use a halo on it.

your gonna want to find a no rise or soemthing for the FS to keep the profile down

How tall is a norise? the freestyle feedneck is only 1"

[Chronobreak]

just udner an inch,,but the adapter slips over it instead of going into it so its even shorter.

your prob looking at 1.8 inches instead of like 13 or soemthing but no biggie i guess..
upto you

and are freestyle angel threaded? ifso rogues wil work perfect. i wasnt sure they were angel threaded though...

[NukeGoose]

FS's are Bushmaster threaded, Impulse feedneck threads are similar enough that some people can use Imp feednecks.