Problem with Roguefactor Product (could be me)

[p8ntball365]

So I got my shadow rail and all my cool stuff. But I have one problem: When I put my valve in and screw in the Field strip screw(with the snatchgrip in between of course), And screw the screw in hand tight, The snatchgrip will wiggle from side to side. I use the allen wrench and screw in a half turn and it still wiggles. So I took the Snatchgrip off and the screw screws in fine w/o snatch. Am I doing something wrong? I talked with Duck Hunt and we couldn't figure it out. Can anyone help, especially Roguefactor.

Thanks in advance.

[warbeak2099]

Do you have that thin little o-ring on the field strip screw? If you do have it, it sounds like the snatch grip's mounting hole is too big.

[p8ntball365]

so how far is too far?

thanks for the speedy response

[Lorenz0666]

you know what, the same thing happened to me, the only thing i can think of is tighten the screw real good like

[p8ntball365]

no i dont have a little oring???

[TMAXXKING1]

oring

the oring should be on your feild strip screw . from the factory ..take a look and see it is there ..

[warbeak2099]

There is supposed to be a small o-ring on the field strip screw. Without it I'd imagine it would fit somewhat loosely.

[p8ntball365]

K I'll take a look


What happened to you Roguefactor??? I was just saying I got good help from AO, no need to get an attitude.

[p8ntball365]

Nope I dont have an oring on there... I traded my eblade for it, so its not from the factory. I see a place on my screw thats orange-y is that where the oring goes.

[Enemy]

yeah having that there will help alot!!

[guysdaman]

Nope I dont have an oring on there... I traded my eblade for it, so its not from the factory. I see a place on my screw thats orange-y is that where the oring goes.

That probably is the "o-ring" everybody is talking about...it is more of a small flat rubbery washer that should be on the bottom of the field strip screw.

[p8ntball365]

does it look like the carrier oring?

[Dryden]

No, should look like a rubber washer.

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=265&categoryID=16

[hitech]

I was just saying I got good help from AO, no need to get an attitude.

I missed the attitude?!?!? Sounded like a simple explaination to me. Why did you take offense to it?

[jamescell]

huh, I bought my rt-pro straight from agd, and it didn't come with an o-ring on the field strip screw