dye autococker 2003

**p8ntball365** · 03-11-2005, 08:51 PM

try turning your lpr up?? That happened to me, and i turned my lpr up and bam 280
but I am no expert so dont hold me to it

**CoolHand** · 03-12-2005, 03:17 AM

Do you mean you are getting no velocity, or that they balls roll out of the barrel when you tip it down? The answer is very different, depending on which one you mean.

Tell me that, and I will render what aid I can.

**kenndogg** · 03-12-2005, 03:59 AM

http://www.moodypaintball.com/pages/tech/trouble.htm

**aznruffryder13** · 03-12-2005, 05:15 AM

thanks..ill try all this stuff later in the afternoon

**octane2079** · 03-12-2005, 09:46 AM

Make sure your bolt isn't upside down.

**p8ntball365** · 03-12-2005, 02:38 PM

If its when your not shooting, its your detent.

**nastymag** · 03-12-2005, 03:10 PM

Actually turning the LPR up wouldnt do anything , it doesnt affect velocity in autocockers.
and if its rolling out when he points it down it means his barrels bore is to large for the paint. the detents in autocockers only keep from double feeding.

**punkncat** · 03-13-2005, 10:46 AM

Originally posted by octane2079

Make sure your bolt isn't upside down.

I don't think you can put a Dye bolt in upside down. Its got a milled area all the way around, not a hole. That is of course assuming it has the stock bolt....although that was my first thought.

Originally posted by p8ntball365

If its when your not shooting, its your detent.

The detent merely keeps it from double feeding. Remember, this is a closed bolt marker....

Really need more details.

**MonsterMag** · 03-13-2005, 12:33 PM

Balls rolling out barrel = New Detents

**Mr. Mouse** · 03-13-2005, 12:35 PM

it could be the timing, or anything, thats why i got rid of my cocker cause i was fixing it alot and got annoying, it could be a number of things cause i had that problem with my cocker also

**nastymag** · 03-13-2005, 12:43 PM

man how many times can we say this ....Detents only keep cockers from double feeding !!!!

**punkncat** · 03-13-2005, 02:32 PM

Originally posted by Mr. Mouse

it could be the timing, or anything, thats why i got rid of my cocker cause i was fixing it alot and got annoying, it could be a number of things cause i had that problem with my cocker also

Umm good point.

Check this......air up the marker. Pull the trigger back really slow. You should be able to make it fire and have a "dead spot" right before the back block moves back. If the 3way is timed too tight then the block will come back and hit the cocking rod before the hammer has fully opened the valve.

**CoolHand** · 03-13-2005, 05:56 PM

Originally posted by MonsterMag

Balls rolling out barrel = New Detents

No, ball rolling out the barrel = bore too big, when talking about a cocker.

dye autococker 2003

dye autococker 2003

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment