Around 6 months ago I had a spare cocker ram sitting around so I decided I may as well just built an autococker around it. After a few months of ebay whoring and buying random parts from peoples spare parts boxes at the field I ended up with the following...
Raw body milled by a friend
CCM backblock
Maddman rocket valve
sto ram
orracle hammer
tickler lpr
sto 3 way
delrin pull pin
delrin bolt made by a friend of mine
orracle front block
sledgehammer regulator
dye asa adaptor
dye slide trigger frame
angel low rise feedneck
pink hoses
Due to the massive amount of ebay whoring I did I built the entire gun for 195 dollars. I also ended up with a lot of spare parts because I bought parts lots which included multiples of the same parts. I now have a few spare bolts, lprs, complete internals, a 99 front block, 2000+ front block screw, kapp 3 way, wgp hinge trigger frame.
Raw body milled by a friend
CCM backblock
Maddman rocket valve
sto ram
orracle hammer
tickler lpr
sto 3 way
delrin pull pin
delrin bolt made by a friend of mine
orracle front block
sledgehammer regulator
dye asa adaptor
dye slide trigger frame
angel low rise feedneck
pink hoses
Due to the massive amount of ebay whoring I did I built the entire gun for 195 dollars. I also ended up with a lot of spare parts because I bought parts lots which included multiples of the same parts. I now have a few spare bolts, lprs, complete internals, a 99 front block, 2000+ front block screw, kapp 3 way, wgp hinge trigger frame.
Comment