Blkmagik's E-tac w/ Lapco shroud and Aimpoint sight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blkmagik
    Registered User
    • Oct 2004
    • 9

    #1

    Blkmagik's E-tac w/ Lapco shroud and Aimpoint sight

    Hey folks finally got my friend Temujin to take some pic of my E-tac.
    I have 2 setups for it: the first one is the Bigshot barrel with an "8 inch
    Shroud. I intially thought that i was too short, so i bought a "12 shroud to
    match. I still kept the "8 inch cause it gave the gun an intersting Star Wars
    Blaster look to it.


    The 2nd is the BigShot with the 12" lapco shroud. Interesting about it i
    s that the shroud was too long becuase the barrel is slightly tucked in the
    tac-one body. I had to go to a local hardware store had them trim off an
    inch off the back. Drilled some holes with my dremel so the tightening
    screws could go through the shroud body and on to the plastic shims that
    came with the shroud.



    The sight is an aluminum replica of the Aim Point. I actually have a kill flash
    inside it to help minimize reflection glare.

    Opinions? which one do you think is better?


    If you want to see other pics of my friends mags go to:

  • mag88888
    ULE MAG
    • Oct 2004
    • 983

    #2
    Navy Seals?
    rt ule custom, boomstick, ult,apoc2k and x board revi, i want:j&j ceramic.

    Comment

    • blkmagik
      Registered User
      • Oct 2004
      • 9

      #3
      Originally posted by mag88888
      Navy Seals?
      Not sure what you mean by that mag88888

      Comment

      • Jakedubbleya
        Don Quixote
        • Mar 2005
        • 631

        #4
        Probably that the guns looks tight, but not exactly paintball-relative upgrades/mods.

        Seriously tho, looks good. I like the 7/8ths of the barrel shroud look.

        Navy Seals?
        Rangers brah, to the fishes with the seals.

        Comment

        • Chipper

          #5
          Awsome Pic

          That is sick, I really like that color. If you look closely it almost resembles a Glock, but that may just be my imagination running.

          Comment

          • blkmagik
            Registered User
            • Oct 2004
            • 9

            #6
            Originally posted by Jakedubbleya
            Probably that the guns looks tight, but not exactly paintball-relative upgrades/mods.

            Seriously tho, looks good. I like the 7/8ths of the barrel shroud look.



            Rangers brah, to the fishes with the seals.

            Thanks, the one positive about the "8 shroud is the ability to remove the barrel with ease. With the "12 you actually have to remove the shroud first before you can untwist the barrel

            Comment

            • blkmagik
              Registered User
              • Oct 2004
              • 9

              #7
              Originally posted by Chipper
              Awsome Pic

              That is sick, I really like that color. If you look closely it almost resembles a Glock, but that may just be my imagination running.

              Another great thing about Temujins gun is the predator board in it. Its got a really light trigger pull. I test fired it and it really rips! I think we need to take a video of it and post it on the whore site one of these days.

              Comment

              • ICP
                Who needs two tubes??
                • Feb 2005
                • 424

                #8
                Very nice looking markers. I like both shrouds. I'd have to keep them both too. :) Great job. And you killed two birds with one stone. A very nice rec/scenario marker and a steathly speedball marker.

                Comment

                • Jakedubbleya
                  Don Quixote
                  • Mar 2005
                  • 631

                  #9
                  Another great thing about Temujins gun is the predator board in it. Its got a really light trigger pull. I test fired it and it really rips! I think we need to take a video of it and post it one the site one of these days.
                  Wait, not to be newbish, but is there a custom shop that makes those mags? They are so sick lookin, i need one!

                  {Edit: asked before i looked, can buy custom emags (e-tac), my bad guys.

                  Still gunna get one tho:)}

                  Comment

                  • JoshK
                    Je mange du poulet. mmmmm
                    • Mar 2004
                    • 2666

                    #10
                    I dont ever wanna run into your ninja skills at my field!!!

                    Comment

                    • blkmagik
                      Registered User
                      • Oct 2004
                      • 9

                      #11
                      Originally posted by Jakedubbleya
                      Wait, not to be newbish, but is there a custom shop that makes those mags? They are so sick lookin, i need one!
                      You can buy it direct from AGD or you could do it the long route like i did and bought an E-mag lowers. Purchase a tac-one body from Rogue Factor and then add the bells an whistles you want on it.

                      Temujin, did a major overhaul on his in comparison to mine. He had CoolHand from Logic Paintball install the Predboard and the Break beam eyes and he attached a micromag milled battery case from another E-mag he bought on line.

                      Comment

                      • blkmagik
                        Registered User
                        • Oct 2004
                        • 9

                        #12
                        Originally posted by ICP
                        Very nice looking markers. I like both shrouds. I'd have to keep them both too. :) Great job. And you killed two birds with one stone. A very nice rec/scenario marker and a steathly speedball marker.

                        interesting thing you should say that, my actuall field gear is also a hybird. I wear the fusion digital camo jersey and pants from specialopspaintball. The whole get up is desinged to feel like any of the jersey and pants you see from dye, but got a cadpat design on it giving it the look of scenario threads.
                        Last edited by blkmagik; 04-13-2005, 03:58 PM.

                        Comment

                        • Maggot6
                          Registered User
                          • Aug 2004
                          • 1527

                          #13
                          Someone is a great photographer, / photoshopper for the backgrounds and the lighting.. First e-tac that looks good :)

                          Comment

                          • BigEvil
                            www.BigEvilOnline.com

                            • Feb 2005
                            • 9333

                            #14
                            NICE

                            Ive been thinking about that myself. Im glad to actually see a real pic. I was messing around with the idea on photoshop.

                            Comment

                            • SpecialBlend2786
                              Registered User
                              • Jun 2003
                              • 4023

                              #15
                              oh man that looks awesome. Makes me wanna own a tac..

                              Comment

                              Working...