Anything I can do to make my 'mag feed paint better?

[Scott Hudnall]

I concur with the others.....buy a new parabolic powerfeed plug and you'll be ok.

regarding other chops issues.....you need to get rid of the wire nubbin/detent and use the plastic nubbin/detents.

Also, what bolt are you using (assuming L7 bolt)? To help stop chops without the L10 bolt system, then try a L7 bolt with a foamie.

Combination of FOAMIE bolt, plastic nubbin, correct feedplug, a good loader and quality paint will result in very very very few chops, if any. It's not uncommon for me to shoot an entire case without breaks....and that is my exact set up.

[Automaggot68]

if you want no chops ever and have some extra cash then get a level 10 and a ule body (or an emag center feed) or get an classic mag body for it.

the cheap solution is to sand it down so it feeds right, and the other other cheap solutiion is to get a new plug.

U HAVE SOLVED HIS PROBLEMMSS.


i'd go with sanding it, maybe using a dremel.
THe Halo wont work well with the powerfeed itself, as it works BEST with a lowrise vert feed.

[AGD202]

dont put the plug in as far as it can go... back it out a little and ur problem will be solved

[trevorjk]

put a large oring at the base of the plug.... sorta like you would do to a barrel(threaded barrels) or at the base of a regulator... it will give it that little bit of space and will solve all your problems