New body frames

[68classicmag33]

If I were to buy a new body frame...would all of the internal pieces come with it?

[Mr. Mouse]

you mean a new body? like the ule and stuff? no body comes with internals, the internals are basically the valve (minimag/classic valve, x-valve, rt valve, e-mag valve,etc), Rt valves cannot be used on Classic rails just to keep that inmind, X-valve is AGD's newest valve and you can buy parts for it to make the trigger pull even lighter and the X-valve also makes the gun have a response trigger somewhat, and the Sear is basically the only other internal part which is connected to the trigger frame or drops into it from the rail

[68classicmag33]

you mean a new body? like the ule and stuff? no body comes with internals, the internals are basically the valve (minimag/classic valve, x-valve, rt valve, e-mag valve,etc), Rt valves cannot be used on Classic rails just to keep that inmind, X-valve is AGD's newest valve and you can buy parts for it to make the trigger pull even lighter and the X-valve also makes the gun have a response trigger somewhat, and the Sear is basically the only other internal part which is connected to the trigger frame or drops into it from the rail

Ok... so If I bought a new ULE mainbody...could I just take the internals and put it in the new mainbody?

[Mr. Mouse]

uhm, yup =)

[wanna-b-ballin']

yes. but if you have a classic rail, then you will have to knock out the barrel latch thingy to put on the ULE body. and you will have to use an autococker threaded barrel also.