scratch or other alternitive

[Vex]

You can always go with the Classic Mag center feed body from the AGD online store. I think that they're $60. You can keep your Freak Barrel back (centerfeed twistlock) with this body. I've got one, and I just tweaked my other hopper right/left barrels so that they can be used as centerfeed also.
Just a though.

[Gumbe]

well i want the ule body i like the way it look btu for now i wana make this body look good ...sooo i just wana know if a drum all will do the job

[wanna-b-ballin']

i just took my standard feed body into the shop today to see what i could do to it. i didn't want to risk my minimag body, its cooler.
i talked to the teacher about sandblasting and stuff, but he said it would be a bad idea, because stainless steel can rust if its in contact with iron. well in our shop, we work mostly with iron, so i cancelled out the sandblasting; i didn't want to imbed iron particles into it.
so i wire-wheeled it (its a wheel that spins really fast and it has a bunch of wires poking out.)
and that made it pretty shiney itself. not the matte blasted color, but shiny. not nearly as shiny as chrome, but shiney. and then i went over the body with 600 grit wet/dry sandpaper for a little while. made it a more uniform shiny all around. and then used some rubbing compound on it to polish it a little bit.

useing the sandpaper and the rubbing compound made it shinier, and also removed any iron particles that may have been on the whire wheel.

it took maybe 4 or 5 minutes to do a good job with the wire wheel.
then because i could, i spent about 25 minutes on sanding it.
then about 10 or 15 with the rubbing compound.
then you want to carefully wash the body to remove any dust or chemicals etc..

it took me a little bit more than a class period to do it.

[personman]

Dude, all you need is sand paper and elbow grease. Buy a pack of emory cloth at home depot.
You probably want grits from around 300 - 1000. You can get even higher grit paper at an automotive shop. After you've got it sanded with high grit paper, just buff it and you're done. It might take an hour or two but it will probably get your scratches out.

Oh and it will give your body a polished stainless steel look.

[wanna-b-ballin']

useing a wire wheel goes WAY faster than sandpaper. i just used sandpaper for finishing touches and spots around the feedneck that werent easy to wire wheel.
a wire wheel should be fairly easy to come by. some people have them in their garages and most shops of any kind should have them.

[Gumbe]

wire wheel...ummm is it weird that u have NO clue what that is...i was thinking of getting a drum all they r cheap only $30canadian and that comes with the polishing wheel and the grinding wheel..is that all i need?

[Gumbe]

umm..anyone...also my dad's shop has a demel (sorry if that not how you spell it) but it only comes with one attachent the wire wheel....if i use that and buy a polishing head for it should it do the job

[Gumbe]

anyone i need to know today i am geting it tomrrow

[guysdaman]

yes a dremel will work but because the wheel is so small on it, it will take awhile to polish and sand....you are better off just getting some varying levels of wet/dry sand paper and start off with the lowest grit and work your way up to the highest...finishing off with some polishing compound. This route will take longer but it will also be alot cheaper than buying a dremel and the different attachment wheels for it....look here for more info on polishing mainbodies