Well over the time i've been on AO I've been Building my mag in mind with the idea of in the end haveing a gun completely one of a kind. Well I'll start off from the begining. I Started with a PBgear 68 Classic TKO mag. Then with a drop, warp and a coupple other goodies i had this:
The some more modding I finally got a flatline, ULE body, Intell, and some other stuff includeing a lvl10
OK then I didnt upgrade for a while untill a ment another AO member that lived somewhat close to me Named Joez and he had his Emag which I ran while i was still in the process of tuneing that damn ULT on a classic valve
. Well needless to say within a week I bought the lowers from him for around $175 
but the noid was shot and the board buttons had been broken off. no in this next pic it shows it with a RT valve. That would be Jayloo's old RT valve i barrowed for a day.
Then Talking to Joez again I found he had a Xvalve for it! Also got it madd cheep for 145 and I bought it and he Came to my school which wasnt far from him so he stoped by on my way to the buss so I bought it.
Now with the Frymark Frenzy I picked up a pair of the Lady Pannels a day after they came out with them.
Then I found a awsome Dealer on AO named Luke. He hooked me up with his new Toolless QD Air/warp mount thingy and I loved it. He even throgh in a free set of his Custom emag pannels since I was pachent on wateing for it.
Then after kinda sitting around looking at my gun for a while I saw it needed something custom. Something 1 off. I saw Luke was doing Custom railmilling just what the Dr ordered! Well after a long process of talking with him throwing ideas left and right and drawings we settled on an Idea. And now that Its back from milling the thing looks beautiful!
And all that is Left is a battery Pack milling which I'm in the process of doing and 1 other date with the mill you'll all have to wate for but trust me It'll be worth it.
OH ya I've code named this Emag: The black Monster" Even though it sits at 11inches high.
The some more modding I finally got a flatline, ULE body, Intell, and some other stuff includeing a lvl10
OK then I didnt upgrade for a while untill a ment another AO member that lived somewhat close to me Named Joez and he had his Emag which I ran while i was still in the process of tuneing that damn ULT on a classic valve
. Well needless to say within a week I bought the lowers from him for around $175 but the noid was shot and the board buttons had been broken off. no in this next pic it shows it with a RT valve. That would be Jayloo's old RT valve i barrowed for a day. 
Then Talking to Joez again I found he had a Xvalve for it! Also got it madd cheep for 145 and I bought it and he Came to my school which wasnt far from him so he stoped by on my way to the buss so I bought it.
Now with the Frymark Frenzy I picked up a pair of the Lady Pannels a day after they came out with them.
Then I found a awsome Dealer on AO named Luke. He hooked me up with his new Toolless QD Air/warp mount thingy and I loved it. He even throgh in a free set of his Custom emag pannels since I was pachent on wateing for it.
Then after kinda sitting around looking at my gun for a while I saw it needed something custom. Something 1 off. I saw Luke was doing Custom railmilling just what the Dr ordered! Well after a long process of talking with him throwing ideas left and right and drawings we settled on an Idea. And now that Its back from milling the thing looks beautiful!
And all that is Left is a battery Pack milling which I'm in the process of doing and 1 other date with the mill you'll all have to wate for but trust me It'll be worth it.
OH ya I've code named this Emag: The black Monster" Even though it sits at 11inches high.
Glad it went to a good owner.
Comment