BPS "Showdown" - PRIZES

[Evil Bob]

If you guys want to maximize your RoF without the chuffs, you need a real force feed loader that can maintain constant pressure on the ball stack which is something that the Eggo and gravity fed loaders cannot do by design.

Even when the Halo/Reloader is not actively spinning, the spring on the feed disk is loaded keeping tension on the entire ball stack going into the breech just like the Q-loader with its constant spring tension design. The only time you should realisticly chuff with the above loaders when when they're low on paint and the stack is no longer under constant pressure.

-Evil Bob

[Boydster]

Why not make this like Bingo? Every contestant that wants to enter pay like 5 bucks. Don't post the vids till the end. Other wise people will see a fast one and decide not to enter.

This would be better than a few select people pay 50 bucks.

[Lohman446]

Why not make this like Bingo? Every contestant that wants to enter pay like 5 bucks. Don't post the vids till the end. Other wise people will see a fast one and decide not to enter.

This would be better than a few select people pay 50 bucks.

Thought of it... and decided against it for a few reasons
1) I expected to see a total of $50 for first prize - Beemer and others have been exceptionally generous
2) If there is money going both ways there may be an accounting issue, and it may be in violation of board rules
3) I wanted everyone to have a chance - I really want to see where AO stacks up - I expect the fastest complying video I will see will be in the 13-14BPS range.
4) Less arguing this way... if things get bad I can nix the contest with noone loosing money - this was the deciding factor BTW

[jenarelJAM]

ok, sorry about this guys, but its looking like i'm not going to be reffing this weekend because my local field is closed, therefore no air fill, therefore no second/third vid... If i get everything done ASAP, i MIGHT get my vid in a day or so before the deadline.
It would be really helpful if someone could goldwave my previous post's movie. I dont need an extentive analysis, but if someone would just give a quick look over and post how fast i am shooting, that would be great. Thanks

[barrel break]

Oh well, I thought I might have a chance at entering, but it would seem that i cant get into portland for an air fill in time (I think).

[Beemer]

Just 4 fun

hey lohman, scince i'm putting in prize money, can i still enter? my devilmags pretty fast

Ha Ha ya go for it. Im just sitting over here waiting to post mine to. I said I could do 10 to 12 but I lied.

Besides its not the Devil its your finger.

__________________________________________________ ______________

[SteelSoul]

It would be really helpful if someone could goldwave my previous post's movie. I dont need an extentive analysis, but if someone would just give a quick look over and post how fast i am shooting, that would be great. Thanks

I can look at this for you.
I have a question are you using Hybrd mode?
I dont know for sure cause I dont have a emag.

Let me know
Look for the results soon

[jenarelJAM]

no i'm shooting in emode. the pin that rotates between E and M is on the E. let me look at the vid to see if thats apparent, if not, i'll take another one. Thanks SteelSoul

[Boydster]

It's in Emode, just it looks as if the sear rod is hitting it and bouncing the trigger. Is it?

[jenarelJAM]

nope, the trigger isnt going all the way back, i am just barely tapping it so that it goes past the sensor point, then it returns.

EDIT: oh i see what you mean now, no the trigger rod isnt hitting it, the safety is on and i have the trigger rod adjusted really close to the hall sensor actuation point so that i can have fun in hybrid mode(not in-game, just for random fun) and get up to 18 or so bps rapid-firing. If you want, i can adjust the trigger so that it is more apparent that the pin isnt hitting the trigger, but it might mess me up cause i'm not used to it.

[Blazestorm]

I'm going to win.

I was shooting 17-18 all day today, legal.

None of that "raking" or "flicking" or anything.

My fingers are crazy, I don't know how or why.

Yarrr

[Boydster]

nope, the trigger isnt going all the way back, i am just barely tapping it so that it goes past the sensor point, then it returns.

EDIT: oh i see what you mean now, no the trigger rod isnt hitting it, the safety is on and i have the trigger rod adjusted really close to the hall sensor actuation point so that i can have fun in hybrid mode(not in-game, just for random fun) and get up to 18 or so bps rapid-firing. If you want, i can adjust the trigger so that it is more apparent that the pin isnt hitting the trigger, but it might mess me up cause i'm not used to it.

That's what I was getting at. I was talking about adjusting the sear rod though. Not the trigger stop. You should adjust the sear rod so it's right behind the trigger when it's held down in Emode. Makes hybrid a whole lot easier and fun to use.

[Pyroboy597]

how will u varify that the person is not playing the video like 20% fast or anything? even if the clock on the camera shows the minutes.. it would still be less than a minute of video.

[yakitori]

I'm going to win.

I was shooting 17-18 all day today, legal.

None of that "raking" or "flicking" or anything.

My fingers are crazy, I don't know how or why.

Yarrr

lets see your vid. .

Im looking forward to seeing that 17-18bps for 8 seconds.

[jenarelJAM]

how will u varify that the person is not playing the video like 20% fast or anything? even if the clock on the camera shows the minutes.. it would still be less than a minute of video.

I'll put a clock behind my gun when i do it, or show 5 seconds clicking away on it or something before i start shooting.

That's what I was getting at. I was talking about adjusting the sear rod though. Not the trigger stop. You should adjust the sear rod so it's right behind the trigger when it's held down in Emode. Makes hybrid a whole lot easier and fun to use.

How do you adjust the sear? that would make things a great deal easier for me. do you just take needle nose's and twist it so it unscrews?(or something)