Just finished my SPYDERMAG **PICS**

[paintballfreak90]

um.. I don't get you people.

Cost Efficient = Yes
Good Looking = Not really
Unique = Sorta.. now
Sick = Not really. What was the total cost of the project.. gun included?

Nice job but unless you did it all for like 300 bucks gun included you wasted some dough

I dont understand what your talking about. Have you ever owned a spydermag, because this thing is worth every penny that i have spent on it. Not trying to start a fight here but this thing could probably kick your guns a$$. BTW:

cost efficient=no
good looking=YES
unique=YES totaly customized(you cant just put a spyder frame on a mag)
Sick=DEFINATLY

[paintballfreak90]

your rail has a pump slot!

Maybe i should make it a spydermagpump

[68magOwner]

my lil brother wants me to build one for him, may do it over the summer, approximately how hard would you say the mod is to do and have work correctly?

[warbeak2099]

I dont understand what your talking about. Have you ever owned a spydermag, because this thing is worth every penny that i have spent on it. Not trying to start a fight here but this thing could probably kick your guns a$$. BTW:

cost efficient=no
good looking=YES
unique=YES totaly customized(you cant just put a spyder frame on a mag)
Sick=DEFINATLY

Cost efficient = yes

Used ESP frame ~ $50
Tboard + Tswitch = $66
Aftermarket trigger (lets say the ACP slasher) = $23
Eyes and installation ~ $50

Total ~ $190

That's under $200 for an upgrade that gives you a board capped at 36bps w/o eyes and uncapped w/ eyes, a 25g or 50g switch, eyes, a nice trigger, and you can go back to lvl 7 which will give you better efficiency, faster cycling, and less required maintenance.

Of course you can then opt for dye stickys (+$20), a ramping chip (+$20), and an adapter block (+$10) so you can use normal asa's/rails/drops. That's another $50 and you're still under $250. That's pretty good considering you almost have a devilmag. Minus the AFA code with extra modes of course. But who needs anything other than semi anyways. The other disadvantage is you can't get it in a 90*. That's the only thing holding me back.

[MadPSIence]

add that 250 (slightly under-stated but I'll not argue right now) to the price of a body and a rail not to mention valve, bolt, grip, asa, feedneck...

poof.

[mark_1791]

Pics work fine...

Anyways...that needs new grips and a new trigger badly.

[personman]

Explain to me how that is a 'waste of money'?

It's a gun, it fires paintballs. It works just as well as any other gun in that price range.

[evilhomer]

MadPSI, you dumbass... Making the SyderMag is as cost efficient as you're gonna get. Think about it. It's either 250$ for an ESP frame, eye installation, T-Board etc... or 250$ for a PTP frame (estimating). Also, compare the price of having an ESP Frame, eyes, t-board etc.. to an Eblade... Yea, they're the same...

[behemoth]

Put the asa in the oven, for like 10 mins, get it hot..

spray the easy off on it

take it out with some old oven mitts, and scrub it with a tooth brush, or a brillopad

Repeat.

Once all the anno's off, take scotchbrite, and rub in one diriection. That'll give it a brushed look

If you want polished, you'll need some rubbing compound and a buffing wheel or something.


I'll do it for a price

[paintballfreak90]

once i can get some cash then ill buy the grips and trigger and assecories, but for now it works great

[ultralight]

glad to see that you did a major marker mod yourseldf and that you are happy with it.

let others say what they want. but you should try not to make statements like "my marker wuiold kick your marker's ___. " it isn't necessary, and it only makes you sound childish.

i personally think that you should try to make the frame look better. it doesn't match the rest of the marker in design or finish. i would try new grips ( try some nice custom .45 grips instead of stickies, theyre kind of overdone.), trigger, and i would shave that little blob off of the trigger guard. it seems to me that you care about looks so you might want to polish everything to the same finish to give it some unity.

still, very cool that you were able to do it and be pleased with your creation.

[onedude36]

nice

[peeko]

Just tap some new inline holes on bottom of frame, then u can use any drop.

[SpecialBlend2786]

chord = awesomeness

[paintballfreak90]

i was kinda thinking about taking off the front of the trigger guard and turning my foregrip around to make it slant inward. anyone have opinions on this?