Just finished my SPYDERMAG **PICS**

[Jaan]

Very nice job. I am about to try this myself. How hard was it to get the two sears to work together? I ordered extra just in case.

BTW, you can use Easy-Off oven cleaner to strip anno. Use gloves, and something to contain the cleaner in. I use a throw-away cooking pan. Let the part soak for a while, then use 0000 steal wool and a sponge to remove the anno. When you have it all off, you can use the steel wool and some Mothers metal polish to shine it up.

You *can* use steel wool to polish and usually it comes out fine when you do that, but keep in mind you may get corrosion from dissimilar metals, and steel rusts anyway. In a couple of years those tiny little pieces of steel that have gotten stuck in the aluminum may make it look pretty bad.

[BigEvil]

The way Tony did it is causing extra wear. Its easier just to flip the solenoid thing around so it hits the sear leg. That's the way I'm gonna do it at least.

Ive been thinking about flipping the sear... Im thinking that I would have to take an aweful lot of metal off of the top of the spyder frame in order to get the mag sear in far enough. Have you tried it yet?

[paintballfreak90]

get a dremel and its not that hard

[paintballfreak90]

up up up up up

[tyrion2323]

Don't up old threads without purpose. This ain't PBN.