40 bps halo mod

[SteelSoul]

Check out this link

http://www.i-hacked.com/content/view/164/48/

[BigEvil]

WTH?? It CANNOT be that simple. It tells you how to do it, but the article doesnt tell you what it does.

My interest is peaked. Maybe I'll try this one out.

[Blazestorm]

Oh... it does...

http://www.blazestorm.net/omghalo.wmv

There's my halo w/ it ...

[MonsterMag]

Does it ruin or damage your board in the long run?

[Deltree]

It basically bypasses a part so unregulated voltage goes straight to the motor. Lot's of people on pbnation have been burning out their halo's with this.

[fire1811]

Oh... it does...

http://www.blazestorm.net/omghalo.wmv

There's my halo w/ it ...

link is broken

[nameless143]

Holy crap thats crazy. Dangit, why did I have to buy a reloader b? Or... will this work on the reloader b?

[fire1811]

Holy crap thats crazy. Dangit, why did I have to buy a reloader b? Or... will this work on the reloader b?

why do you have a problem of outshooting your reloader b? I havent heard anyone complain about that yet

[Evil Bob]

Blaze, you had a chance to put it on top of your marker and fire it yet? I'm curious about the paint getting crushed by the motor's now increased speeds.

-Evil Bob

[68magOwner]

Blaze, you had a chance to put it on top of your marker and fire it yet? I'm curious about the paint getting crushed by the motor's now increased speeds.

-Evil Bob

i have this dont to my halo (even though my halo is STILL relatively slow ) i have had no problems with crushing paint, although i have broken a drive cone since doing the mod, which, could be acredited to the mod, or could have nothing to do with it, just be coincidence.

edit- discouraged by the speed of my halo, i went back and checked that i had wired it right, and, doh, wired the wrong ports together, fixing now

[nameless143]

I have a predator morlock in my angel, and I havent been able to get it to fire faster than 23-24 bps on full auto with the eyes on. With the eyes off, I can get insane speeds, but there's a problem with chopping.

[personman]

Yeah there is a huge thread on pbn about this, I was reading it the other day.

http://www.pbnation.com/showthread.php?s=&threadid=882075

[68magOwner]

ok, did the mod, right, definately really fast, but, for those out there that have done this, does the red light stay on all the time on your halo now? does for mine

edit- realised that it is signaling low batt, but, i run rechargable 9.6v's and, these are fresh out of the charger, is this thing really gonna go dead in under a case, or does it just make the light light up?

[personman]

Instead of worrying about wires the people in that thread were just using staples. They said they worked perfectly.

68magowner, check that thread I just posted, I think that was mentioned...

[68magOwner]

ok, read some of the pbn thread, low batt light on seems normal, and, some say it burns up the motor, others beg to differ, so, seems like your taking a risk with it, i think i will just install an on/off switch for it, see what difference it makes on the field if any, then decide to keep it or not

edit- feeds a pod in under 3 seconds now.....:dodgy:

-also sounds like a power saw while it does it

edit- already broke a fin off my drive cone just testing a few hoppers through it, gonna try and run it with one 9.6v rather than two and see how it does

also, the on/off switch works, and will be preety handy, if it runs of 1 battery, use that till it drains it, then switch to regular halo for the rest of the day