Ok i just took apart my mag...and i put it together and aired it up(tank only running out put of 200psi due to the fact it is low) and it doesnt do anything all i hear is CLICK...i am making sure i didnt do anything wrong..did u?
-
-
check your velocity screw and put it all the way out. im not to sure, but i dont think a mag can cycle very well at 200 psi
but if it can, it needs to be all the way out
they try filling your tankwtb logic vert frame in good condition. pics prefered pm me what you have. -
a mag will not run at 200psi, get your tank filled and then try againComment
-
if its a low out put tank
you need a new tank
mags need at least 600-800 input to work properly
soo if you have a low out put hp tank its time for a different one
now if you jest have 200 psi in the tank
FILL IT
and if it is a high output tank do what etjoyride said
"Let them eat war [x2]
~my e-mag~
~ule frame~
~ule rail~
~x-valve~
~3.2 software~
~polished no-rise body~
~black 10" freak kit~
~smoke halo b~
~Fl05283 68 3000 flatline~
That's how to ration the poor
Let them eat war [x2]
There's an urgent need to feed"Comment
-
oh i know that the tank need to be filled usaly though at low psi it sounds like the vavle opening the closing then a little air comes out...jw if i put it together wrong(if it posable thanks)...now time for thread to dieComment
-
Originally posted by Gumbe
mabey its leaking out though the barrel than
if you have level 10 i know what you mean
i shoot my e mag in e mode when theres no air when im board
but i really think you jest need a filled tank
cuse my gun wont shoot at all with 200 psi
if you want a gun that will get a viking or a ion or somthing that runs on low presure
"Let them eat war [x2]
~my e-mag~
~ule frame~
~ule rail~
~x-valve~
~3.2 software~
~polished no-rise body~
~black 10" freak kit~
~smoke halo b~
~Fl05283 68 3000 flatline~
That's how to ration the poor
Let them eat war [x2]
There's an urgent need to feed"Comment
Comment