hopper paint job

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • overkill8000
    CHECK OUT MY WEBSITE
    • Apr 2005
    • 269

    #1

    hopper paint job

    i have seen the post about the custom halo paintjobs but is there a place i can send my hopper
    were thell paint it to my color scheme and its a ak with upgrade board so dont want new hopper
  • overkill8000
    CHECK OUT MY WEBSITE
    • Apr 2005
    • 269

    #2
    someone out there has to know something i want to get it red and black.

    Comment

    • FreakBaller12
      e-tough

      • May 2003
      • 3663

      #3
      What do you mean? Like the fade in your hopper color.
      You're going to need clear shells and RIT dye. Search RIT dye here on AO and you'll find out how to do it.
      I knew not what I did but am now edumacated

      Comment

      • CJ55
        Dirty South
        • Oct 2004
        • 515

        #4
        I know how to use RIT Dye on Delrin Cones and Pods, I can learn on my clear Halo hopper, if it works how much would you pay to get it done.
        Some ghost come from the afterlife, some send you there.
        Tom Clancy's Ghost Recon 2

        Comment

        • rkjunior303
          I need this more than you
          • May 2003
          • 4029

          #5
          Destructive Customs does custom shells.

          Give them a shout:



          You can E-Mail Alan @ [email protected]

          PBN Feedback AO Feedback eBay Feedback

          DIRTY ROTTEN SCOUNDRELS (Rob Kenny and Matt Bradley) LIVE @ www.djinnuendo.com TUES 2/8 - 8 to 10PM

          Comment

          • Athius
            Registered User
            • Apr 2003
            • 533

            #6
            Heres a very cheap and easy way to paint your hopper but this is for solid colors and fades.

            -Buy some clear shells.

            -Buy some R/C paint spray.

            - Paint the inside part of the hopper and let it dry.

            Comment

            • TMAXXKING1
              ROGUE HAS THE GOOD STUFF
              • Aug 2004
              • 1325

              #7
              spo gear

              there is a seller on ebay that has them.. made by spo gear



              some are kinda crazy...
              My Automags.org Feedback

              www.themagsmith.com


              Comment

              • overkill8000
                CHECK OUT MY WEBSITE
                • Apr 2005
                • 269

                #8
                20 to 30 maybe not sure on prices

                Comment

                • P4IN7 B4LLS
                  Registered User
                  • May 2005
                  • 4

                  #9
                  If you want to Fade your hopper your best bet is Dying it:

                  I copied this from somewhere else, don't remember where but i do not take credit.

                  *Get clear shells

                  *Buy packets of Dye in whichever color wanted, I am not sure what brand, try a save-on or rite-aid, for fade buy 2+

                  * Boil water Two if you are fading

                  * Unless you pan is Stainless Steel or an old one you no longer care about, pour the boiling water into an old bucket.

                  *Add dye and stirn

                  *Put shells (WITH THE BOARD AND BATTERIES OUT!) in water. It may take 10+ for the dye to soak in. When fading put either front or back in first

                  *(When Fading repeat steps but for remaining clear side)

                  DO THIS YOUR OWN RISK
                  I hope every step was covered, ill try and find the tru one for more accurate instructions

                  Comment

                  • overkill8000
                    CHECK OUT MY WEBSITE
                    • Apr 2005
                    • 269

                    #10
                    i dont want that i jave a black hopper and i mean like i send it away and they like do a air brush design on it and stuff.....

                    Comment

                    Working...