Time to pump up AGD?

[Wheelman]

I think he may be refering to the AIR valve, Nobody says AGD has to use the Automag platform in every gun they produce, let Zupe think up something a little different and blow our socks off. While we are on the subject how about a completly new six-pack to go with it?

[fuzzy_cheesecake]

If AGD did make a pump who says it has to be based on the 'mag. just make a nelson clone, or betting yet make an aluminum bodied sheridan pump with a brass lined non-removable barrel.

[Evil1]

I know this may be a little off subject, but what is the problem with a real pumpmag? I've never seen or fired an actual mag that had a pump kit. I have heard a lot of people say not so good things about pumpmags in the past. I'm not really sure how a pump mag works. I've always been interested in learning how a pumpmag actully works and I'm currently looking to buy a pump kit for my mag just to see how it works.

[Thordic]

Put it on a ULE body, ULE rail, and i bet it will be one of the lightest pumps out there.

The valve alone would prolly weigh more than a Phantom. If you've ever held a Phantom you'd realize that no mag could ever come CLOSE to that level of lightness no matter how many ULE parts you use.

[Jack & Coke]

I know this may be a little off subject, but what is the problem with a real pumpmag? I've never seen or fired an actual mag that had a pump kit. I have heard a lot of people say not so good things about pumpmags in the past. I'm not really sure how a pump mag works. I've always been interested in learning how a pumpmag actully works and I'm currently looking to buy a pump kit for my mag just to see how it works.

It works like a normal mag that is malfunctioning. A wavespring is used instead of a rubber bumper. This prevents the bolt from returning fully into the locked position. Think of it as simulated bolt stick. The pump arm is use to push the bolt all the way back so it resets.

Unlike all other pumps out there, this one fires from the open breech when you actually pull the trigger (Not that it makes any difference in the flight of the ball).

[Muzikman]

I think it would be cool to see a Sheridan or Nelson based pump built off the current AGD parts (body and grip frames). I don't think it would be all that hard to make a new valve that is nelson based.

[onedude36]

Kinda off topic, but how many shots does a viking get off of a 12g? Shooting slowly, de-volumized preferably. I want to put a pump arm on a viking with a micro switch and flash the board with a pump mode(the switch behind the pump has to be pressed before it will fire) and semi. Any comments?

[MadPSIence]

AGD needs to build an efficient valve, and then make an electronic grip frame that holds a battery so there's no need for a huge ugly battery block on the marker. Then they'd be set.

Oh.. not to mention a better way to set up hoses even if that means a gas through rail / body or something you can run a hose through and then to the valve.

[Wheelman]

AGD needs to build an efficient valve, and then make an electronic grip frame that holds a battery so there's no need for a huge ugly battery block on the marker. Then they'd be set.

Oh.. not to mention a better way to set up hoses even if that means a gas through rail / body or something you can run a hose through and then to the valve.

And that has what exactly to do with the topic, I mean the others were a little off but stayed on the same premise you skewed off into a completely unrelated thread. As far as you comment goes though, take it anyway you want but try wishing in one hand and **** in the other, see what piles up faster. Yes I do understand that we are in the same boat on that one just different ends, I just get really tired of hereing the same old Mags a inefficient speal everywhere I look, that's all.