Adjustables

[SpecialBlend2786]

dynaflowwwwwwwww

I have the older style with the built in non-removable rail. God i love it. The output pressure increases to compensate for the lack of pressure in the tank. And ya gotta love the push-button on/off

[NoLifeLeft]

I've never had any trouble from my Centerflag stuff. I have a 68/45 Hyperflow and a 90/45 Dynaflow. I've been using CF tanks 100% since early 2002.

[GT]

i ran a dyna too the only tank i will ever own, and i have owned them all. I have no idea what you guys are talking about inregaurds to the 10% pressure jump.

[Eric Cartman]

My understanding is (and correct me if I'm wrong) that all tank's output pressure will increase to some degree as the tank pressure falls (less pressure on the springs in the reg?).

[trains are bad]

All single stage regulators (practially all tank regs are) will increase pressure as the supply (tank) pressure drops. The dynaflow definately is no exception. When I used to tune for max legal reactivity I used to find my mech mag running away when I got low on air. This is not a problem now that I'm electro however.

ALso, I used to set my flatline to 1050 before it started running away. My dynaflow started running away at around 900. Which indicates to me that it's a lot higher flowing or faster recharging than a flatline.