Tac-3

[richie]

Or just three tacs,either way.Here is a pic of my two projects as of now and my son's stock tac one.Both of the "E-TACS" are actually mechanical.They are gutted e mag frames with RT-PRO sears,home grown ULE rails.I have all the electronics to make one an E-Tac.I have plans on getting the both coated before the end of the year with DURA TUFF epoxy coating.I'll let you know how that goes.I have a Q-loader set up going on the greenish black one with the stock that is mounted in a set of scope rings on a custom mount.Post pics later.Hope you like :)

[thejesus]

Or just three tacs,either way.Here is a pic of my two projects as of now and my son's stock tac one.Both of the "E-TACS" are actually mechanical.They are gutted e mag frames with RT-PRO sears,home grown ULE rails.I have all the electronics to make one an E-Tac.I have plans on getting the both coated before the end of the year with DURA TUFF epoxy coating.I'll let you know how that goes.I have a Q-loader set up going on the greenish black one with the stock that is mounted in a set of scope rings on a custom mount.Post pics later.Hope you like :)

I really like the one with the stock, looks somewhat like an FN FAL. You could alway buy an M4 Carbine clip and put it where the e-mag battery pack goes. Then again, that would probably alarm some people.

[richie]

Naw I'll just leave it the way it is.It kinda looks real yet it doesn't look real Besides the battery housing fits it just right.I do not want to have to go making another mount for a rifle magazine.I have a VM-68 begging for some attention too.

[rkjunior303]

All it needs is one of the Micro-E battery housings!

[Coray]

Very nice!

[TheTramp]

I really like the one with the stock. I'd use a non-gutted E-Mag for it but that's just my preference.

[paullus99]

How'd you construct the barrel housing again? I think you might have posted on it already, but I can't find it & definitely looking to do something similar.

Thanks in advance & nice Tac's!

[richie]

The one with the stock will be a working Emag when all the parts come in.The barrel housing is made from an air filter inner housing from an Echo PB-400 backpack blower($4) and the end of a Toro commercial sprinkler head.It is very simple but has to be made to fit your barrel.The way I attach it,it can only be mounted to an e mag.I am sure with some more creativity it would fit what ever you had.I will get a pic of it up close later.Thanks,Richie

[Konigballer]

"Naw I'll just leave it the way it is.It kinda looks real yet it doesn't look real"

I agree, I like it when scenario guns have the 'flavor' of real guns, but are'nt total look-a-likes. It's a nice change of pace from all the flashy crap.

"looks somewhat like an FN FAL"

Yeah it does look like a FN FAL carbine, my favorite weapon in Ghost Recon!

[Paintchucker]

Where did the shoulder stock come from? Very creative on the barrel housing btw! Very nice scenario guns! Look kinda real, but not really real... Just like they should. :)

[richie]

Shoulder stock is made in house also

[peewee]

DAMN Those are sweet.

[A-Tach-One]

Sweet! I like your Tacs!

[Spec.Ops1]

Just a suggestion based on results. When you use your e-mag with the buttstock I recommend getting a hopper with a very narrow bottom end and a raised feedned. OR better get get a right or left feed (depending on what hand you shoot with) The reason being is that when you run a buttstock with a center feed the hopper ends up smack dab in the middle of your face and it makes it hard to follow your shots in (or aim ) with people given that you shoulder up your marker properly and not rest it on top of your should like I see so many people do.

Anyway... reason I say this is because we ran into an identical problem when developing our longbow mod for the tac-one.

I dig your mods and props!

[richie]

Thanks spec.ops for the complements.I will be using a q-loader mounted on the left using a mount I made that sits in a set of scope rings.I ordered a vert warp adapter from rouge and will be running it with a very short hose.Visibility should be great.I'll let you know.The longbow deal looks pretty cool by the way.No more paint than I shoot,it would work pretty well for me.Thanks,Richie