Macro+Dynaflow+EMag=?

[PRPB]

[MonsterMag]

Yes , Parker macro from tunaman will hold up. Dont go above 1000psi though. Also before you do this , 32* fittings will not hold anything over around 900psi.
Get some good fittings and stay under 1000psi :)

[PRPB]

Thanks, I'm going to run 900 at first and see how that does. Of course after I get that hose and fittings. I'm gussing tuna has the fittings to... Well off to Tunamart I go.....

[jenarelJAM]

i had the same deal as you, i bought 2 90 fittings from 32 degrees, and the foot of macro it came with, then i went to tuna, bought 2 fittings and 5 feet of his parker macro. ditched the macro right away, but i've run 1100-1200 psi consistantly through my gun, and all i switched was the macro. as far as i can tell, the 32 degrees and fittings tuna has are the same quality. both will work fine.

[Automaggot68]

Dont forget squid either.
I bought some macro off him and it's held up through all the crap I put it through.

A buddy of mine bought a RedZ Pack off him a while back, and Squid even threw in 30 feet of Macro.

[Lee]

i run that exact setup on my emag w/ no problems at about 850 psi.

[Carbon]

yes they probably could hold teh pressure, but should you run it at that pressure though?

I wouldnt. i owuld go back to the ss with a qd. Anyway its your life.

[SpecialBlend2786]

Squid sells the best macro in the world.

period.

[PRPB]

Squid sells the best macro in the world.

period.

Oook Care to explain why it's sooo good?

[SpecialBlend2786]

Oook Care to explain why it's sooo good?

Because when squid origionally started to sell it, he proved that it could withstand extremly high pressures for us and provided the data. Nobody I know of has had a problem with it to date.

[PRPB]

Do you recall what the pressure was it can withstand.

[SpecialBlend2786]

If i remember correcty, it has a working pressure of 900, so you shouldn't worry about the line, just worry about getting some high quality fittings. It's like a buck or less for a foot also, which is a great price.

[PRPB]

Hmm that sounds good.

Where can I go to get the HQ fittings and what do they run? If they happen to cost more that is.

[PRPB]

OK Squids PM box is full. Anyone have his e-mail address they can PM me.

[jenarelJAM]

yes they probably could hold teh pressure, but should you run it at that pressure though?

I wouldnt. i owuld go back to the ss with a qd. Anyway its your life.

a quick disconnect works with macro... i've got it set up on mine...
you wouldnt think it though, ou just have to attach it before you attach the macro fitting, the whole q/d has a 1/4" in, 1/4" out fitting