Pyscho Ballistics ((Lightning Vs SuperBolt))

[RingOfScale]

Does anyone know the differences between these two guns? Which one is supose to be "higher end"? I was thinking of buying one and putting an E2 on it, and was just wondering which one was a better choice. I can find them for pretty similar prices, so it is hard to tell which one was intended to be the better gun.

~thx

-Ring

[warbeak2099]

Stay away! You will end up spending more money replaving everything on the gun than you did on the gun itself. My friend had to replace:

Pneumatics ~$90-100
Internals (including the bolt) ~ $80-100
Feedneck ~ $30-40
HP Reg ~ $65
Cocking Rod ~ $5-10

Keep in mind that these are basically 32* fockers. The name on them is psychoballistics, but they're made by 32*/NPS so same crappy quality.

[magman007]

actually they are old dye bodies that didnt meet spec, atleast they used to be, now they may just be using the mill design

[tony3]

They suck hardcore, suicidal snyper from here had one that we passed around our team as a last resort backup wow it was horrible. Every time you shot the gun would leak from the 3way and it just overall sucked.

[RingOfScale]

well tony, leaking from the 3-way wouldnt matter, cause dont e-blades replace with 3-way??

another posibiltiy is trying to find an OGI 03m somewhere, a couple sites still have them for 180 or so.

[kenndogg]

got mine new off of ebay for 140. Good deal if you ask me. I replaced the pneus with some stock ones I had laying around it it shoots great.

[BigEvil]

Stay Away!!!!
Stay Away!!!!
Stay Away!!!!
Stay Away!!!!
Stay Away!!!!
Stay Away!!!!
Stay Away!!!!
Stay Away!!!!
Stay Away!!!!
Stay Away!!!!

[RRfireblade]

Nothing but problems here too. I get them in for service regularly with problems from all angles, very often brand new in the box and won't fire a paintball. Low grade aluminum constantly strips out by the low grade screws and specs that make the potential for a reliable marker a complete crap shoot. 1/10 work acceptably but even then, is highly unlikey to last due to the quality of componenets and building materials.

[WenULiVeUdiE]

You would be better off buying a used mech. cocker. You can find ones with a fair amount of upgrades for cheap or a stock one even cheaper.

[WARPED1]

The one we have in the shop is ok, the trigger kinda sucks, it takes alot to get it ripping.
If you play tournies it's not a good gun, for rec play it's an ok deal.

[WickeDKlowN]

You can't even change the bolt on the Superbolt without drilling through the back block for a pin.

You get what you pay for, they're $99 for a reason.

[WARPED1]

Why change anything?! It works fine as is, for rec.

[warbeak2099]

That's what my friend was using it for, rec play. He had to replace everything before he could even get on the field. The pneumatics crapped out and started leaking after shooting about 50rds through the gun, the valve busted, the hammer and bolt got damaged really bad really quick, the cocking rod bent, the hpr started leaking nonstop, and the feedneck cracked off. One by one, he replaced almost every peice on the gun. Not good for rec or tourneys.

[WARPED1]

Haven't had to replace anything but basic orings on the one we have, been used quite a bit.
You got unlucky.