X-valve

[SPECK]

How much is one of these worth brand new?

[warbeak2099]

$325 new w/o a trade-in

$225 new w/ a trade-in

~$200 used

[SPECK]

What is a trade in?

[Dayspring]

You send AGD a valve (usually a classic) and they give you $100 off the price.

[WARPED1]

You send AGD a valve (usually a classic) and they give you $100 off the price.

The serial numbers on both halves of the valve must match to get the trade in.

[JimmyBeam]

i still cant believe how much they are charging

[WARPED1]

i still cant believe how much they are charging

I always thought it was too much for a valve too. But, oh well...........

[Dayspring]

No they don't. Read the instructions on the store page.

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=8&categoryID=9

You MAY turn in a mismatched valve - that is, a valve where the serial number on the valve body and the regulator half do not match. You may turn in a valve where the valve body has an AGD serial number and the other half is an aftermarket regulator. You may not turn in half a valve.

The serial numbers on both halves of the valve must match to get the trade in.

[Eric Cartman]

The serial numbers on both halves of the valve must match to get the trade in.

However they will accept valves with aftermarket parts. Mine had a Diamond Labs 8 hole mod rear end and they were fine with that. Obviously the serial numbers didn't match in that case.

[SpecialBlend2786]

I always thought it was too much for a valve too. But, oh well...........

thats what i thought, then i realized that the Xvalve is basically the entire internals of the marker, the rest is just a tube, rail, sear and frame. Then add the fact that it comes with a lvl 10 installed and I dont think the price is that bad.

[WARPED1]

No they don't. Read the instructions on the store page.

http://store.airgun.com/index.cfm?fu...8&categoryID=9

Cool. I didn't see that.

[SlartyBartFast]

$325 new w/o a trade-in
$225 new w/ a trade-in
~$200 used

Or, 450$ and you get an entire Tac-One.
Or, 350$ for the basic RT ULE.

If you're really smart, you'll just buy a brand new Tac-One or RT ULE from one of the dealers and sell your complete marker with the classic valve to go towards the price.

[jacobeid]

Also your valve has to be under serial #30,000 or something.

[SpecialBlend2786]

Or, 450$ and you get an entire Tac-One.

If you're really smart, you'll just buy a brand new Tac-One or RT-Pro from on of the dealers and sell you complete marker to go towards the price.

LOL thats what i did

[WARPED1]

Or, 450$ and you get an entire Tac-One.
Or, 350$ for the basic RT ULE.

If you're really smart, you'll just buy a brand new Tac-One or RT ULE from one of the dealers and sell your complete marker with the classic valve to go towards the price.

Thats a better deal, probably why the valve alone is so much, so people'll just buy a whole gun.
But, and I'm not flaming mags or bashing them so shut up you flame happy doods, I can't see spending that much on a mech gun when for less than $300, I can get a great gun with break beam eyes, rebound, and interchangeable bodies cheap.