hopper on warp body??

[GusDaDog]

is it possible to use a hopper and elbow on a warp feed body? I am getting a warp body gun but won't have a warp until Summer, in the mean time can I use a hopper and elbow on it or is it physically impossible?

[Bonx0007]

unless you use a lot of duct tape I think it is impossible.

[Paintballer86]

I have a warp body and it is Definetley possible. there will be a little gap between the lip in the elbow and the body.

You can cut the elbow so it wraps around the powerfeed tube. Hope this helps.

[GusDaDog]

got any pics showing how that works?

[Paintballer86]

no, but I can get some. Give me til after the weekend.

[AngelBoy]

I think MajorDamage tried this when he was playing. I think he said it didnt work too well or it broke the elbow or he dropped it or somethin...

[GusDaDog]

hmm...clear and precise post there...thanks....what was the point again? someone tried it and didn't like it, right? At least I think that's what you said....so far I've gotten 3 "don't even try" and 1 "yup, possible"....any more input?

[PRO_Ski101]

I just got my warp body today,and there's JUST enuf room to catch.I do believe it wont be SECURELY locked BUT it will stay on if u have a good screw on elbow.

[GusDaDog]

that's what I got, a good screw on elbow....so how much grab are we talking about here, 1/8"? 1/4" 1/2"?

[PRO_Ski101]

I haven't really messured it but it looks to me about like sum where between 1/4-1/2 of an inch.

[GusDaDog]

and will the powerfeed plus wap over and work propperly from the other side?

[rifleman]

It looks like I may be buying a warp body too, and a halo along with that, so no matter what people tell me, I'm going to put a hopper on top of that body.

I'll mostly likely tap three holes into the powertube and fasten the elbow down to it that way--I'm not trusting that dinky screw on the elbow for tournies.

[MajorDamage]

Here ya go, enjoy! It works, but don't press on the elbow, I had the gun on the ground, and tried taking the elbow off without undoing the screws...CRACK! Had to use a new elbow. It works fine though. oh, and heres the version of the pic with me in it, lol I look SOOOOO funny in this pic!

ENDO!

[MajorDamage]

Oh! And MAKE SURE THE ELBOW IS TIGHT! I lost the hopper one game when I jumped in the snake! LOL!

ENDO!