Morlock/Pred 2 Or Pred. Drop in for Emag.

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Spartan X
    EviL Ambassador
    • Apr 2003
    • 1296
    #1

    Morlock/Pred 2 Or Pred. Drop in for Emag.

    Ok well I just got my New Acid Red Full ULE emag in the mail today. I had a acid red a while backl and have owned 2 x-mags.

    I am trading my ULE for a IT body and adding cash...


    And this is my delema. I can get a Morlock/Pred 2 custom install board installed into my Emag for really cheap...including the price of the board, break bean eyes milling, and eyes and all. Basically for only a Tad more then the drop in board along is going to cost. The installer is very profesional and I trust him...maybe be abl;e to be finished by IAO for RJjunior to use in Afica...

    So my question is, should I get the custom install, or not? I will NOT get the drop in board if it comes out after July because I leave for Boot Camp for Rescue Teams on Aug 15th...


    I'd also like to here from any one that has a morlock installed in there Emags...from what I know, morlocked E-mags are Called E-Magnums.


    I'll post pics of the E-Mag as soon as it's nice out.
    EviL-

    Oh come Hither my Evil friends. Let us dance upon our MINION of pure EviL apon the sup air ball field. Let us give thanks for this EviL OMEN that the Lord AVATAR has given to us. Let us crawl apon this wicked earth, converting the people to our HEATHEN ways, let us PIMP them with our SCION. Let us be faithfull till Judgement day, when EviL shall finally RULE THE WORLD.

    http://www.nazgulclan.com/ryouko/fridaynight3-1.wmv

    http://www.greenshines.com/control/media/1078969315.wmv
    Tags: None
    • warbeak2099
      That is my foot!
      • Jan 2004
      • 4447
      #2
      I know most emaggers would like you to order the drop-in just so the thing will in fact come out. But I think you need to do what's right for you. And that is getting the Pred/Morlock installed. Just have this guy install the Pred2 and eyes for you.
      My Feedback

        Comment

        • magman007
          I <3 my Penis
          • Jun 2001
          • 7579
          #3
          dont, i repeat, dont trade for an IT body, and deffinitely dont add cash

          they were selling on ebay for like, 40 bux a while ago. they werent made from slugs, and they had crappy tolerances. stick with the ule body untill you can find something else to suit you.



          		Originally posted by Tom in reffrence to a post saying he acted like my dad...
          "That's right!
          WHO'S YOUR DADDY!!"
          ALL QUIT AND NO GO!!! Team Icky Forest-Shatnerball 2003!!!
          www.tunamart.com
          DONT SUPPORT HYPOCRITICAL MISSLEAD YOUTH, BOYCOTT HK

            Comment

            • Spartan X
              EviL Ambassador
              • Apr 2003
              • 1296
              #4
              Originally posted by magman007
              dont, i repeat, dont trade for an IT body, and deffinitely dont add cash

              they were selling on ebay for like, 40 bux a while ago. they werent made from slugs, and they had crappy tolerances. stick with the ule body untill you can find something else to suit you.

              WOW This Is News! can any one else back this up and comment before I commit to the trade?

              Apon closer inspection, it does not look like the the IT body may be eye friendly since the detes sit so low. Tanks Magman. No IT body, keeping ULE..it's all good.
              Last edited by Spartan X; 07-14-2005, 10:11 PM.
              EviL-

              Oh come Hither my Evil friends. Let us dance upon our MINION of pure EviL apon the sup air ball field. Let us give thanks for this EviL OMEN that the Lord AVATAR has given to us. Let us crawl apon this wicked earth, converting the people to our HEATHEN ways, let us PIMP them with our SCION. Let us be faithfull till Judgement day, when EviL shall finally RULE THE WORLD.

              http://www.nazgulclan.com/ryouko/fridaynight3-1.wmv

              http://www.greenshines.com/control/media/1078969315.wmv

                Comment

                • A-Tach-One
                  I'm done!!!!

                  • Mar 2005
                  • 2204
                  #5
                  Originally posted by warbeak2099
                  I know most emaggers would like you to order the drop-in just so the thing will in fact come out. But I think you need to do what's right for you. And that is getting the Pred/Morlock installed. Just have this guy install the Pred2 and eyes for you.
                  Actually number of preorders are no longer an issue, there are enough. Just waiting for the board to come out and can't wait to get mine! But if you have someone that will do the Predator 2 board install cheap, then I might concider that. Good luck they both look like great options.

                    Comment

                    • BigEvil
                      www.BigEvilOnline.com

                      • Feb 2005
                      • 9333
                      #6
                      your going to need the eye work done anyhow... the only differnece with the boards will be the on/off switch and warp controlls (I think). Im sure you would be happy either way. BTW, im pretty sure that most people are backordered on PRedator boards. Make sure your guy has one for you. Also make sure its got the latest 5.0 code on it.

                        Comment

                        • rkjunior303
                          I need this more than you
                          • May 2003
                          • 4029
                          #7
                          Yeah, I forgot to mention that over AIM. While those IT bodies LOOK good, they are in actuality JUNK.... Crappy tolerances, alot of times they don't have the brass washer, etc.. Trouble.

                          PBN Feedback AO Feedback eBay Feedback

                          DIRTY ROTTEN SCOUNDRELS (Rob Kenny and Matt Bradley) LIVE @ www.djinnuendo.com TUES 2/8 - 8 to 10PM

                            Comment

                            • Lohman446
                              Useful posts: 7
                              • Jun 2003
                              • 9315
                              #8
                              Originally posted by Spartan X
                              WOW This Is News! can any one else back this up and comment before I commit to the trade?

                              Apon closer inspection, it does not look like the the IT body may be eye friendly since the detes sit so low. Tanks Magman. No IT body, keeping ULE..it's all good.

                              Magman is right on this... if you want back up
                              "Unless someone like you cares a whole awful lot, nothing is going to get better. Its not" - Dr Suess

                                Comment

                                • Spartan X
                                  EviL Ambassador
                                  • Apr 2003
                                  • 1296
                                  #9
                                  OK, Well I backed out. I was going to be adding 65 for the gloss black body and a cmm...I figure it was like buying a cmm and tossing in 30 extra for a new body...so yah, ULE is it.

                                  Question on the On/Off switch.

                                  For the drop in were are they going to put it? The E-Mag never had a on/off, it only ever had the battery Pin....While the X-mag had both the battery pin and a on/off switch just above the battery pack...
                                  EviL-

                                  Oh come Hither my Evil friends. Let us dance upon our MINION of pure EviL apon the sup air ball field. Let us give thanks for this EviL OMEN that the Lord AVATAR has given to us. Let us crawl apon this wicked earth, converting the people to our HEATHEN ways, let us PIMP them with our SCION. Let us be faithfull till Judgement day, when EviL shall finally RULE THE WORLD.

                                  http://www.nazgulclan.com/ryouko/fridaynight3-1.wmv

                                  http://www.greenshines.com/control/media/1078969315.wmv

                                    Comment

                                    • White_Noise
                                      Element *608*
                                      • Jul 2003
                                      • 1295
                                      #10
                                      Originally posted by Spartan X
                                      OK, Well I backed out. I was going to be adding 65 for the gloss black body and a cmm...I figure it was like buying a cmm and tossing in 30 extra for a new body...so yah, ULE is it.

                                      Question on the On/Off switch.

                                      For the drop in were are they going to put it? The E-Mag never had a on/off, it only ever had the battery Pin....While the X-mag had both the battery pin and a on/off switch just above the battery pack...

                                      the drop in predator is supposed to use one of the buttons on the back of the marker as the on/off
                                      President Of the UW-Madison Badger Ballers

                                      AO Feedback

                                      1 of 35 SFL Emags VV02746
                                      Silver Karta/Logic RT Winner:GOTM Most Bling for December VV04971
                                      Sydarm SY00715
                                      Nelspot (under restoration)

                                        Comment

                                        • TheTramp
                                          Registered User
                                          • Jan 2001
                                          • 4019
                                          #11
                                          The top button as a mater of fact. The bottom one will turn the eye's on and off.
                                          "Relax. Don't worry. Have a Home Brew."
                                          -Charlie Papazian

                                          Feedback: http://www.automags.org/forums/showt...threadid=40134

                                            Comment

                                            • Spartan X
                                              EviL Ambassador
                                              • Apr 2003
                                              • 1296
                                              #12




                                              Here we are, nice and clean instalation. AS you can see there is also a on/off switch insalled, but it's not connected. He had trouble with it frying because the current from the stock battery was to great. The guys at AO said he needed Mosfiets...well did not now know what to do so he just left it in there and said I could get it connected later by some one that knows what they are doing.

                                              I have not dry fired it yet...can't wait

                                              Question.

                                              The foamy is gone and I'm told I do not need it...but the ball seams to roll back a awfull lot and that worrys me....cause it roles back so much that it does not trip the eyes... Now with the morlock if that happends then you just hold the trigger for a second, but still, I'd hate for that to happen when I'm snap shooting....

                                              The only thing I can think of to fix that is using a really fat foamy, r getting a detent installed behind the ball to stop roll back...
                                              EviL-

                                              Oh come Hither my Evil friends. Let us dance upon our MINION of pure EviL apon the sup air ball field. Let us give thanks for this EviL OMEN that the Lord AVATAR has given to us. Let us crawl apon this wicked earth, converting the people to our HEATHEN ways, let us PIMP them with our SCION. Let us be faithfull till Judgement day, when EviL shall finally RULE THE WORLD.

                                              http://www.nazgulclan.com/ryouko/fridaynight3-1.wmv

                                              http://www.greenshines.com/control/media/1078969315.wmv

                                                Comment

                                                • behemoth
                                                  SVSTC?
                                                  • Nov 2002
                                                  • 7750
                                                  #13
                                                  Thats pretty sweet.

                                                  Minus the 48inch barrel

                                                    Comment

                                                    • yakitori
                                                      #14
                                                      dammmn spartan. That is one long CP on that emag. Is that a 16 incher? Looks good. I do know a guy w/ a morlock in his emag locally. Sleepingbeauty is his user name. You can maybe talk to him about it some if you have any questions.

                                                        Comment

                                                        • MadPSIence
                                                          Innovation 101
                                                          • Mar 2005
                                                          • 969
                                                          #15
                                                          looks like 18-20 inches..

                                                            Comment

                                                            Previous 1 2 template Next
                                                            Working...