AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Will any high-end electros run on CO2 or Anti-Syphon CO2?
Just wondered.
Thanks!
Yes.
Now, some will want to define "high-end" a little differently, but here goes:
Impulse
Shocker
Nerve
ION
Intimidator
Matrix
DM4/5/C
Newer Angels
Every Cocker ever (Ecocker or not)
Bushmasters (new and old)
Defiants (new and old)
Vikings
Excaliburs
The list goes on and on . . . . . . .
Basically, anything that will run reliably at 500psi or less will be just fine with CO2.
You will want to run anti-syphon and double reg it for sure though (otherwise the high ROF will draw liquid into your main reg and freeze it up).
I've run every electro I've ever owned on CO2, so I know it is possible.
Just be sure to wear gloves, or the vert reg will freeze to your hand.
The first one set to about 450 or 500psi (to chop off the spikes), and the second set to your operating pressure (to run the marker).
I usually run a MaxFlo 4500 system with an anti-syphon tube, and another inline reg for the foregrip.
If you want to use screw in bottles, go with a Palmer's Female stabilizer (the tank screws right into the reg), or one of the older bottom line MaxFlo's from an Impulse (converted to HP of course).
Comment