Need some AKA info please

[rkjunior303]

tie??? I know nothing
but please note that is is much better then the handcuffs digging into your skin (blood is no good)

zack, will send ya a pm...
looking forward to playing with new (more experienced) people.
::warning:: the feild is more woodsballish...

riiiiiiiiiiiiight.. i've never had to deal with handcuffs... usally the tieing up comes on the 2nd date though -- not the first night out! ha.

[zackzel]

Alright guys, I'm having some trouble with my new excal now. I know this belongs in the tech forum but since this thread is already here I figured I would just post it here. So the Problem is that I put a few drops of oil in my excal aired it up and fired it about 20 cycles to get the oil through it. The gun sounded fine, so I stuck my hopper and barrel on it, stuck some reballs in the hopper and started plugging. well needless to say the balls just rolled out of the barrel. After about 20 shots an o-ring came out. I took out the bolt and determined the oring was the very front one on the tip of the bolt. So I put it back on and it seemed really tight. I fired the gun a few times with new success and noticed the O-ring developed I crack in it. Any ideas on what to do, the gun was working fine the day before yesterday and I didn't play with anything on it.

Thanks.

[zackzel]

Anyone have any ideas?

[atm743]

Anyone have any ideas?

i didnt know theres an oring on the bolt??

well if there is then put oil on it or go to home depo and get a new oring

now for the balls rolling down the barrel i would say thats from the oring problem or the volocity or lpr are not set right.

call aka up and ask them to be sure