emag make fire
Collapse
X
-
Tags: None
-
that can not be good for the board
My Guns: chrome and black pump mag
-black 2k sniper 2
-32* vision imp with ups, ECS, reloader B
-was'd imp w/ i-frame and all ups, warp feed
-88/3000 and 48/3000 tanks
AIM: Paintball1084
my feedback
-
-
-
Being that is the solenoid ground there must have been a short in the noid or the wires..The board is repairable by the way.. cheap too!!"It's my buddies gun"
"I just bought it"
"It came that way"
"I borrowed it "
I HAVE HEARD THEM ALL, SO BE ORIGINAL !!!
My gun says I'm holding it back from doing great things ...

Comment
-
personman -
latches109
how?editOriginally posted by KayleAGDBeing that is the solenoid ground there must have been a short in the noid or the wires. The board is repairable by the way.. cheap too!!
yes the ground solenoid wire came loose; i soldered it back on. that was fine.
I went to put the battery pack on and noticed some of the solder was bulging close to the neighboring contact. So, with the battery pack like this:

i take my knife to cut away the extra solder.
the battery slips on. my knife touches the two contacts and **poof** fire, for a few seconds, until i pull the battery off. scared the sh*! out of me. you can see the solder ran away from the ground it was so hot.
woodsball survival tip#1: if you get lost during a woods ball game and need to make a fire, you can sacrifice you emag.
Comment
-
I can fix it if you would like me to , ...only because you made me laugh ...Originally posted by KayleAGDBeing that is the solenoid ground there must have been a short in the noid or the wires..The board is repairable by the way.. cheap too!!
"It's my buddies gun"
"I just bought it"
"It came that way"
"I borrowed it "
I HAVE HEARD THEM ALL, SO BE ORIGINAL !!!
My gun says I'm holding it back from doing great things ...

Comment




Comment