**Tinymag Project**

[Phantom_Mag]

So, it all started a long time ago when Mike saw his first sydarm. Mike knew he couldnt afford a $350 pistol so he.......

Well heres the first pics of the first steps to my sydarm plan. I have many ideas and its not even near completion. I had an idea to use tip off scope mounts for my 10 round magazine to flip off and screw in the vert Feedneck and the mag could be used as a pistol or a small mag. As a small mag it would use my 3.5oz C02 tanks. But then coming to know the most inmportant part of mags, they are highly upgradeablle and adjustable. So i can just take off the ule and put on my other body i have modded already to fit on the rail. Overall length will eb equal to a sydarm.

Heres the PLAN

1.RPG 15* ASA REVERSED
2.Cutting the rail short enough when it comes flush with the 15* tight against the frame.
3.WAIT FOR ULE BODY IN MAIL. Mill Ule body flush with rail front and curves.
4.Apply 10 Round magazine to top of ULE body.
5.Using long warp powertube make 10 round tube sit back farther and mod so its only 9 round and fits farther back on mag making overall length 1 inch shorter.
6.Get ano
7.......any Ideas.

Im sure there is plenty I left out. But i thought i should let people see so i can get a better idea of plans, and if there are better ideas, Two heads are better then one.

[warbeak2099]

Mount an asa on the side of the valve and screw the quick changer into it. Get a RPG pariah body instead of the ULE, and you really should've used a classic rail. Then find an Action Markers 10 or 15rd feed tube for an Illusion and screw it into the Pariah body. The Illusion feed tubes were angel threaded. I'd also use a single trigger frame.

[Phantom_Mag]

The only reason i used a non classic rail was so i could fit the 15* on. I understand iI wouldnt nee dit if the asa was on the valve. I cant use a Pharia body because it will be just a bit short of the edge of the rail, and i want it to be flush. Illusion, ill look into that, i didnt like the look of the asa on the side of the body and valve, i put alot of thought into that. Thanks for the advice. Illusion...illusion......

[master_alexander]

also put a freak barrel with a one inch tip

[rellikmok]

This looks like a pretty good idea. The pariah body is wicked cool but it seems like he is trying to keep it cheap. And the last time I looked, the pariah isn't that cheap.

[AGDlover]

Get a Classic Frame they are slightly smaller. looks good man

[B.A.M.]

that is sick. You could also put on a 12 gram changer on that like going vert but idk if it would work

[Hairball]

I could sell you a single-trigger frame.



Looking great though.

[behemoth]

That rail is ULE'd inside, no?

If you mill it flush, you'll have a big hole in the front of your rail.

[Counterfeit_Syn5304]

Mike...you just have too many projects going lol. You can't get away from the mech stuff can ya. Oh well, I'll see ya at college....What rail is that by the way?

[Mag Master 04]

Y grip, ULT and LX it

[eXlax]

I'm liking it man. It has a real clean look to it compared to other pistol style markers. Be interesting what other kind of barrels you could use on it. Also, be pretty wicked with an x-valve and ULE trigger. Good work man.

[Phantom_Mag]

Yeah i tossed around the idea of an xvalve, but that throws the idea of it being a pistol away, cant run the x of of c02 unless i use a remote. Also the rail is speciafically non uled for that purpose, im a thinker i was wondering if anyone would catch that. LX might be a possiablity but its harder on air, and im workign with exactly 18 shots, i need everyone. Keep your ideas coming they are great. Ill have to see what like better vert or 15* if i got vert you better bet your goign to see a KARTA rail for sale and a dallara coming my way.
Thanks,
Mike

[A-Tach-One]

You just love projects don't you? There are some good ideas here and have some decisions to make. I can't wait to hear or see where you take this project. Keep us updated on the progress.

[Gitaroo Man]

Single trigger looks better