valve issue

[Rudz]

ok im an idiot, i kno, but i was screwing around with my valve, and took it off, now when i try to put it back on, i cant figure out how to make the pin that holda the valve to the body stay in place, it goes in, to make the valve slide in place, but how do i get the pin out to fit the valve so it doesnt slide out? thanks!!

[wanna-b-ballin']

i have no idea what you are talking about.
i assume its on an automag.

are you talking about the rear frame screw or the small spring pin that protrudes from the valve and slides into the Z groove?

[Rudz]

spring pin

it isnt springt, lol it doesnt spring back and forth, x valve, karta body, did i lose something when i was screwing around with it? i did didnt i? idiot!!

[BD_Paintball]

so you can get the valve to go into place where it is supposed to but you cant screw the field stip screw in. if thats the case you just have to line it up right. you need to give is some more info for us to help you

[Rudz]

not a screw, its a pin

the pin that holda valve to body, ill take a pick

[BD_Paintball]

the pin that holda valve to body, ill take a pick

u do that b/c i dont remember a "pin" holding my valve in my body.

[Rudz]

heres the pik

http://img153.imageshack.us/img153/4673/pin8hu.jpg

its the pin that is in the middle of the brass piece, i cant figure out hoe to make it come back out after its fitted bacl on the body

[BD_Paintball]

thats the on/off pin. it will come out when you air up your gun. another way is to take the brass piece out and pull the pin out but there will be 1 or 2 orings that might come with it. put those back in how they came out. when you dont have air in the gun and pull the trigger that pun will always stay in b/c the orings hold it so it does not come back out. thats normal to have it stay in when they gun is not aired up. if you have air put it on your gun and see if it will shoot. this is the brass looking thing http://store.airgun.com/index.cfm?fu...&categoryID=23 the pin you see will go inside that and when you pull the trigger the sear pushes that and lets the gun shoot.

[Rudz]

thanks

now i kno, thanks for helpin me

[Beemer]

Well Done

thats the on/off pin. it will come out when you air up your gun. another way is to take the brass piece out and pull the pin out but there will be 1 or 2 orings that might come with it. put those back in how they came out. when you dont have air in the gun and pull the trigger that pun will always stay in b/c the orings hold it so it does not come back out. thats normal to have it stay in when they gun is not aired up. if you have air put it on your gun and see if it will shoot. this is the brass looking thing http://store.airgun.com/index.cfm?fu...&categoryID=23 the pin you see will go inside that and when you pull the trigger the sear pushes that and lets the gun shoot.

Nicely Done BD. A.O. lives


___________