B2K Questions

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • AGDlover
    And boom goes the dynamite
    • Aug 2003
    • 3322
    #16
    ok well i dont exactly have a preset with me so I should just drop my flatline way down?
    Euro E-mag | TL63 | XMOD| EM01610
    Euro Rt | OG | RT02382.

      Comment

      • rifleman wi
        1st ID- The Big Red One
        • Oct 2003
        • 1988
        #17
        you could probly just set it to 450...

          Comment

          • AGDlover
            And boom goes the dynamite
            • Aug 2003
            • 3322
            #18
            ok thanks I was just wondering how far down i had to go
            Euro E-mag | TL63 | XMOD| EM01610
            Euro Rt | OG | RT02382.

              Comment

              • trevorjk
                <S>WooLooLoo</S>
                • Dec 2002
                • 4324
                #19
                it depends what kind of regulator you have on the gun... some regulators prefer 550-650 psi input for maximum performance. although a 800 or 850 out put tank will work just fine... as will a nice 450 output tank. but any good regulator will drop down the pressure coming in from the tank anyways so it doesnt matter what kind of tank you have

                as for triggers and aftermarket mods... check out these sites

                Vaporworks
                Tantrum
                Zenitram
                OTB - Vert Frame
                t33kyboy "So if a cat is dropped from 11 inches, it will most likely die."

                  Comment

                  • AGDlover
                    And boom goes the dynamite
                    • Aug 2003
                    • 3322
                    #20
                    ok I think I'll be running the stock reg for a while before I pick up eather a CP or AKA reg so 600psi should be fine? or should i shoot lower with the stock reg?
                    Euro E-mag | TL63 | XMOD| EM01610
                    Euro Rt | OG | RT02382.

                      Comment

                      • wimag
                        BEZERKERS
                        • Aug 2001
                        • 1334
                        #21
                        Originally posted by deathstalker
                        I just gave my Bushy its first workout at Sam's yesterday and I was very pleased. I have a Zenitram adaptor and Micro Rock, Shocktech (CP) HPR, and a Vapor feedneck. My "eBay valve" came in the mail Friday, but I didn't have air so I have yet to install it. What I found with the stock HPR is if you screw in the bottom piece of the reg too much (where the fitting goes), you will restrict your flow. The easy fix is to simply loosen up that one piece. Still, I got rid of the thing. I was initially concerned about my feedneck because I didn't think it was holding my hopper tightly enough, but I never gave it a second thought during games.

                        I had to do a little troubleshooting to get my velocity up, but it turns out all I needed to was turn up my LPR. I was then shooting about 275fps and my HPR was set to 300psi. Not sure what the Micro Rock was set at, but I walked on the field for game three with 7 pods, a full HALO, and 4500psi (70/45 tank). I walked off with 7 empty pods, a half-full HALO, and approximately 1500psi. I should be able to fine tune my regs for even better results.

                        Bushies are a total steal at $200 new w/PDS.
                        your settings seem high. I shoot about 280fps at 210psi.
                        BEZERKERS
                        ALL MAG SHOOTING TEAM

                          Comment

                          Previous 1 2 template Next
                          Working...