Predator Problem - Leaving To Play in 2 Hours. HELP

[Echo419]

Simply put, with stock settings (After a reset) with eyes on there is a Cap of no higher than 11. When I set the global cap the eye off cap is clearly whatever I set it to. No matter what I do I can't get the eye off to work fast. HELP

I have reset the board multiple times for the same result.

[MadPSIence]

frankly if you can't peform at 11bps you don't deserve to play paintball.

[Echo419]

Yo man its not that, I just want my Angel to look good at the field =) First time i'm bringing it out of my house... Everyone told me it was a useless hole and just to sell it, and i woud like to prove them wrong, and represent TAG the best I can... an at 11 bps it just wont do it... I mean If i have to I will play at 11, I mean im used to shooting mags for god sakes...

HELP

[SCpoloRicker]

Is it possible you have disconnected the wire eye?

I disco'd mine cleaning, and it ran capped at around 8-10 ish when the eyes were in the "on" position.

[nt2004]

frankly if you can't peform at 11bps you don't deserve to play paintball.

I dont see why it is so hard for you to offer help instead of criticising him. I had my gun in the wrong eye mode last week (new chip, first time using it) and it kept my gun capped at 12. I played some games and it had a much larger effect that I would have thought. It sucks when your gun filters out most of your pulls so its easy to see why he'd want to fix it. Of course you probably just viewed this thread as another means of starting a ramping/bps argument

[tyrion2323]

frankly if you can't peform at 11bps you don't deserve to play paintball.

Funny that you're talking about performance...

[Lohman446]

Its very possible the eyes are misaligned and not "seeing" each other

[MadPSIence]

Funny that you're talking about performance...

care to elaborate?

[NewMagMan21]

Now children...

[MadPSIence]

Now children...

it's all good.

[tyrion2323]

care to elaborate?

Yes.

But I won't.

[BigEvil]

One of the registers is an eye-test. Turn that register on. The LED should stay a solid color to show that the eyes are seeing each other.

If the LED does not come on, there could be a problem with the eyes somewhere. Check the alignement, check the wiring harness, connectors, ect.

Also, set your dwell to 14, and try turning your debounce DOWN to see if the gun speeds up.

If all of this checks out, there is a glitch in the board. Cal TAG and see about sending it to them for a check up.

[SCpoloRicker]

Yes.

But I won't.

OH SNAP!!1LOL2!