i need to know where to hook up a capacitor on the diy morlock in a hyperframe. pics would be helpful. any help at all would be appreciated thanks
-
-
Connect the cap to battery wires. There is a negative side and a positive side to the cap, only the negative side is marked on the side of the cap. Be to use a 10,000 uf cap.
-
thats it? you just run it inline with the battery? Thats sounds simply enough, who needs "devil" mags anyways
Tom was the last of a now extinct breed, a breed of players who build a community, a breed of owners who gave to the sport never taking more than what they deserved. I hope to see you at the feild again some day....Comment
-
Yeah thats it. This is how GADevil made the first Devil mags, with Hyperframes. Let us know how you make out.Comment
-
well now it fires, but it won't cyle fast, and i need both blue and yellow noid wires hooked up to one side, while only one red on the other, it shoots maybe once a second, and yes i've tried it with eyes on and off, board is in semi mode, and im almost 100% that of my connections are in the right spots. o ya and when i pull the trigger down, and hold it, the light goes dim blinking, need help still fellas, will try all ideas.Comment
-
Try reading the Morlock Manual...
It sounds like a timing/dwell problem.
If you're trying to get it to work with the stock settings it might not...I remember the stock BPS setting on the DIY Morlock kit is 10 BPS.
go to http://www.exarin.com if you need more help.
Sean
AGD Did someone call me?
You should go to each gun manufacturers forum or call them up. Ask the OWNER of the company why his gun is better. When you get your answers come back here and tell us what they said.
You should buy my gun because I have 5000 posts that say I care.
AGD
----Comment
-
how do i set the debounce? also how do i set the bps?Comment
-
Clarification
Hey,
I read this forum and I know this question varies from what is being discussed but by inline, do you mean like this:
++++++++++++++++ ++++++++
Battery Capacitor
------------------------- -------------
Where the capacitor is connected to the positive and negative legs? Thanks.Comment
-
What do you mean "one side". The cap should be inline with the battery.Originally posted by mr.mag218
If you are really stumped email curt at www.exarine.com. Hes the man.Comment
-
If you cant get it to work and would like a stock 20 bps board let me know.Comment
Comment