Brittle paint

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • canilive
    New York
    • May 2005
    • 52

    #1

    Brittle paint

    Just wanted to know how you guys deal with brittle paint. I'm kinda upset, as the paint I use is usually pretty good. But the last shipment I received is definately brittle. I put them in a DM5 and the paint was all on the eyes, paint was breaking out of the barrel. I broke a ball in my mag,ugh. Usually, the paint bounces a few times after it hits the floor. This time around it just breaks. I guess its because of the weather, as I live in New York. I have 2 and a half cases of this stuff, I'm not going to just throw it out. I'm using the stiffest spring on my RT ULE custom mag, so I guess I should just try using the red spring and see how that goes. Just wanted to know what you guys thought. Maybe, somebody has a tip or something for bad paint.
  • Lohman446
    Useful posts: 7
    • Jun 2003
    • 9315

    #2
    Originally posted by canilive
    Just wanted to know how you guys deal with brittle paint. I'm kinda upset, as the paint I use is usually pretty good. But the last shipment I received is definately brittle. I put them in a DM5 and the paint was all on the eyes, paint was breaking out of the barrel. I broke a ball in my mag,ugh. Usually, the paint bounces a few times after it hits the floor. This time around it just breaks. I guess its because of the weather, as I live in New York. I have 2 and a half cases of this stuff, I'm not going to just throw it out. I'm using the stiffest spring on my RT ULE custom mag, so I guess I should just try using the red spring and see how that goes. Just wanted to know what you guys thought. Maybe, somebody has a tip or something for bad paint.

    But it in a large sealed container with an open cup of water and leave it set - the paint will absorb the moisture and may become less brittle.
    "Unless someone like you cares a whole awful lot, nothing is going to get better. Its not" - Dr Suess

    Comment

    • athomas
      Of course it works-its AGD
      • Jan 2002
      • 8039

      #3
      It'll also help if you use a large bore barrel when shooting. I use a .696 bore when shootng paint like that. It reduces barrel breaks to nothing.
      Except for the Automag in front, its usually the man behind the equipment that counts.

      Comment

      • Dayspring
        aka- The Day Wang

        • May 2001
        • 9664

        #4
        If you're playing outside, put it in a cooler. It will help keep the temp at a reasonable level. Just make sure to temp adjust the cooler in the warm house first.

        Comment

        • 50 cal
          The evil voices win today
          • Nov 2000
          • 960

          #5
          When we played a tournement once that field paint only, they sold some Zap that was extremely brittle. I put my foamie bolt in my RT and turned the velocity down to 270. It helped a lot.

          Comment

          • BD_Paintball
            UW-Whitewater Paintball
            • May 2003
            • 2268

            #6
            When you take a shower put an open bag in the bathroom with you. The air will have a lot of water in it. When you are done with the shower seal the bag back up. The paint will take in some water and should get a little harder. It will also take some dimples out.
            My Guns: chrome and black pump mag
            -black 2k sniper 2
            -32* vision imp with ups, ECS, reloader B
            -was'd imp w/ i-frame and all ups, warp feed
            -88/3000 and 48/3000 tanks

            AIM: Paintball1084

            my feedback

            Comment

            • SummaryJudgement
              Selling stuff, good stuff.
              • Aug 2004
              • 1944

              #7
              Place each ball in your mouth individually for no more than 3 seconds. Then gently wipe each one off immediately. Then, wrap each one in parchment paper and bury them in the light of the full moon no less than 1 foot apart. Now, get some eye of newt...........

              Comment

              Working...