What type of barrel threading is this?

[OneEyedPimp]

Hey, my friend aquired three barrels. Two of them have the same thread and one does not here are the pictures:



and:




The st!ffi is just there for reference. It would also be great if you could tell me who makes the center barrel.

[ZEROte]

it looks like you have three different barrels.the two are not the same thread. if you look close one is slightly longer than the other. the first is an angel threaded barrel. the stiffi is a cocker threaded barrel and the center looks like an old school kingman spyder barrel.

[OneEyedPimp]

it looks like you have three different barrels.the two are not the same thread. if you look close one is slightly longer than the other. the first is an angel threaded barrel. the stiffi is a cocker threaded barrel and the center looks like an old school kingman spyder barrel.

I knew the stiffi was a cocker, suppose I should have mentioned that. I have no idea what the long one is, as I do not own any angels. Did Kingman change their barrel threading, because the center will not fit on any of my spyders, however it is really really clost to cocker threading.

[ZEROte]

the long one is definately an angel barrel and the other one is definately not a cocker thread because it is slightly too long.

[Kevmaster]

i think the long one is angel (as has been said) but i dont know what the middle one is

[Glickman]

the other one looks like a bushie

[WARPED1]

The one far left looks like Angel threads.

[WenULiVeUdiE]

The middle barrel appears to be from a Cobra or King Cobra.

http://www.docsmachine.com/tech/barrelguide.html

[OneEyedPimp]

The middle barrel appears to be from a Cobra or King Cobra.

http://www.docsmachine.com/tech/barrelguide.html

That link really helps thanks. I think the one on the outside looks like an F1 Illustrator barrel, yet the center one is not like a Cobra barrel as the barrel does not taper as it is pictured. I think it is closest to the Soverign, but I dont know. Thanks for all the info.

[Apple_Pie]

I was thinking it looked more like the ICD barrels.

[OneEyedPimp]

I was thinking it looked more like the ICD barrels.

I assume you mean the center one?

[Apple_Pie]

Yeah, the center one. I didnt think there was any question that the left one is an Angel.

[OneEyedPimp]

Yeah, the center one. I didnt think there was any question that the left one is an Angel.

Well the left one does not measure the same as the angel barrel on Docs website. And the center one does not measure up to the ICD on one Docs website.

[Shane-O-Mac]

Left barrel: Sterling, I think....maybe F-1 illustrator

Center barrel: Old Cocker, ya the threads are longer, but thats the way the older ones were. See if the stiffis threads "Mesh" with the center barrels threads, that is one way to tell if they have the same threads. Several barrel companys shortened the threads to make it unscrew quicker.

Shane-O

[OneEyedPimp]

Left barrel: Sterling, I think....maybe F-1 illustrator

Center barrel: Old Cocker, ya the threads are longer, but thats the way the older ones were. See if the stiffis threads "Mesh" with the center barrels threads, that is one way to tell if they have the same threads. Several barrel companys shortened the threads to make it unscrew quicker.

Shane-O

Yeah, they do mesh, that is why I said they were really close.