My Stock Class Mag, almost finished! :D

**yingyang** · 11-05-2005, 07:10 PM

Wow, all the P mags Ive seen are ugly, but this one is really amazing. Nice job hope when everything is done it works out great.

**ROYALKNIGHT** · 11-05-2005, 07:47 PM

Originally posted by behemoth

get a Male to Male straight Air fitting, and put a on/off to that, then screw the 12g into that.

Like this

But, you can put it backwards to help with grabbing it to unscrew.

Just my .02 :)

Hey behemoth, is that your micro mag - pistol if it is , thats one sick lookin mag ! nice work man. send me specs?

**behemoth** · 11-05-2005, 09:03 PM

Originally posted by ROYALKNIGHT

Hey behemoth, is that your micro mag - pistol if it is , thats one sick lookin mag ! nice work man. send me specs?

No, its Gord's i just like the design

**The Action Figure** · 11-06-2005, 12:56 PM

y-frames are so freakin comfy, get one

**Skywalker** · 11-06-2005, 02:20 PM

Originally posted by Arstron

I have been working on this project for a couple months now. I started with a pump kit that I got off of theexecutar, I then ended up with a blue ULE body which I sent off to WWA to have a phantom feed tube installed on and also orderd a 12 gram quick changer at the same time. I just recived the body and feed tube today, but the 12 gram changer will be a few more days. I installed everything on a eclipse splashed rail (grey/silver/black), but still need to get the rail milled for the pump slot, added a black intelliframe, black WWA Truth series barrel, and a classic valve and I now have this:

List of parts:
Blue ULE body
Black phantom horizontal feed
Black/Blue acid wash phantom feed tube
Eclipse splashed rail black/silver/grey
Black Inteliframe
Black WWA Truth Series barrel
Black luke aluminum panels

As soon as it comes in, I will be adding a blue/black acid washed 12 gram quick changer, then after I get the rail milled I will be done. Thoughts? Oppinions? Comments?

Are you sure that's not an Omega rail? It really looks like one. Either way it looks really nice. Good work.

Skywalker

**Arstron** · 11-06-2005, 05:48 PM

No, I am 100% sure its not an omega, I still have atleast 1 of the eclipse stickers that fell off of it.

**Recon by Fire** · 11-06-2005, 08:34 PM

I have a question concerning pump kits:

With a pump kit installed, could I still have the foregrip on it? I envisioned putting a 12gram maybe on the gas-thru foregrip.

**BD_Paintball** · 11-06-2005, 10:55 PM

Originally posted by Recon by Fire

I have a question concerning pump kits:

With a pump kit installed, could I still have the foregrip on it? I envisioned putting a 12gram maybe on the gas-thru foregrip.

yes you can keep the forgrip. i have one on my pump mag and it works fine.

**Arstron** · 11-07-2005, 07:20 AM

yup, the pump kit comes with a longer screw for mounting a firegrip.

EDIT: also added a couple new pictures.

**Duck Hunt** · 11-07-2005, 08:30 AM

Can you PM me with the price WWA charged you to mill the pump slot AND to get the phantom feed on there??

I LOVE IT! I might do this instead of buy a phantom now!

Sean

**Muzikman** · 11-07-2005, 08:43 AM

If you can find them, the AP-M Illusion stock feed tube will screw right into a ULR body.

Also, I would run a vert 12 gram changer.

**craltal** · 11-07-2005, 08:52 AM

I'd use a level 7 bolt with the pump as it's a bit more efficient and requires less tuning.

For Recon:
you can't run an x-valve off a 12g

**Arstron** · 11-07-2005, 09:38 AM

Originally posted by Duck Hunt

Can you PM me with the price WWA charged you to mill the pump slot AND to get the phantom feed on there??

I LOVE IT! I might do this instead of buy a phantom now!

Sean

Well he didnt mill the pump slot for me, but I will pm you the price I paid for the phantom feed and 12 gram quick changer.

Originally posted by Muzikman

If you can find them, the AP-M Illusion stock feed tube will screw right into a ULR body.

Also, I would run a vert 12 gram changer.

I wasnt 100% sure if liquid would be a problem with the 12 grams or not, but since the sydarm uses a horizontal 12 gram I didnt think it would be a huge problem. Please share some of your wisdom on this though.

Originally posted by craltal

I'd use a level 7 bolt with the pump as it's a bit more efficient and requires less tuning.

For Recon:
you can't run an x-valve off a 12g

Level 7 is going to be a must with this, id hate to see the amount of shots you would get with a level 10 and 12 gram. I have somthing I really want to test out, but it involves cutting the valve so I have to play with it once before I do this.

Also, once I get everything in, I will test the xvalve with it and see how it does. It should work with single shots....

**Muzikman** · 11-07-2005, 09:59 AM

**Arstron** · 11-07-2005, 11:38 AM

I can the reversed 15* with one an RPG 15* asa, I know it wouldnt fit normaly, but since the pump kit lowers it, it might be enough with a single trigger frame. I know one of lukes reversed 15* extenders wouldnt work becuse it would interfer with the pump. That might work out pretty good, I do have plenty of hard line here, I could make it look similar to a phantom that way.

Oh and about the feed tube, there is one screw that holds it on, remove it and I can add a vert feed neck back in. :)