tried looking them up on the mag smith..they got none. where else do i find these?
-
-
The alpha rail is made by Ryan over at logicpaintball.com. A lot of other little goodies are also made by him as well. -
thanxComment
-
coolhand is his AO name
he makes some good stuff
as well as rougefactor.
heres a picture ofmy old mag with the first alpha rail.
he first made this rail by milling old minimag rails then he made a promo run of them that he custom made out of a chunk of that 6616 or whatever its called aluiminum called the alpha rail
he still makes them but they are a tad different that the one i had
i have more pics but i cant find them for some reason.
the back bottom by the valve is milled out soo you can kinda see the bottom of the valve
its the lightest ule'd rail i have ever owned and seen.
if you have that rail with a ule body xvalve and a i frame or y grip omg the gun will be less than 2 pounds
the alpha rails use minimag sear and sear pins. soo you will need a different length on off pin for the rt or xvalve.
also you cant use mag threaded bodies on them.
"Let them eat war [x2]
~my e-mag~
~ule frame~
~ule rail~
~x-valve~
~3.2 software~
~polished no-rise body~
~black 10" freak kit~
~smoke halo b~
~Fl05283 68 3000 flatline~
That's how to ration the poor
Let them eat war [x2]
There's an urgent need to feed"Comment
-
wow man wat im asking my self now is..."is there anyplace for a foregrip on that rail??" on ur pic it doesnt seem like theres much room. i already have a mnimag with a y frame. would it come cheaper to buy and alpha rail or to get mine milled into one??
by the way..tanx for teh info :)Comment
-
The milling is $35. Sure there's room for a frontgrip. I have one of the scratch made Alphas and I have a foregrip on it. You just need to buy a foregrip that fits a classic rail. Logic sells one actually.Comment
-
does a dye comfy gas through grip work??
tahts my setup
[IMG]
[/IMG]
Last edited by KillingSpree; 11-21-2005, 09:34 PM.Comment
-
Yeah, any grip/gas thru would work, as long as you have the adapter.Originally posted by KillingSpreedoes a dye comfy gas through grip work??
tahts my setup
[IMG] [/IMG]Comment
-
Yea, just have Coolhand do the milling. Like I said, $35 and annod whatever solid color you want.Comment
-
ok cooli ill pm him
thanx alot guysComment
-
im not sure if he still mills them but go for it an ask cuse i know they are cheaper to mill
i know he used to but not sure if he still dose
and yes you can put a foregrip on it
i had a 15* on it later after the picture was taken .
"Let them eat war [x2]
~my e-mag~
~ule frame~
~ule rail~
~x-valve~
~3.2 software~
~polished no-rise body~
~black 10" freak kit~
~smoke halo b~
~Fl05283 68 3000 flatline~
That's how to ration the poor
Let them eat war [x2]
There's an urgent need to feed"Comment
Comment