I have got a few questions about Q loaders. Will it push past the stock detent on a BKO and if so will just getting a slightly bigger/stiffer Oring fix it. Also I was wondering what they are going for used. I looked around the BSTs but I couldn't find one recently. I plan to buy onw with Christmas money with 4 or 5 qpods.
-
-
shouldnt push past the detent, and if they do all you gotta do is the o-ring mod
theyr arent many q-laoders out and havent seen one on a bushy yet
-
It depends. If you have a single detent on your gun and you prewind the spring tension to around 16 winds, it might push past your detent. That is the optimal prewind amount for like 25-30bps though. If you only want to shoot around 15bps (like me) and you prewind to 11-12 winds, you shouldn't have a problem. Basically you can adjust the spring tension on the stack. If you're pushing past your detents, you just need to unwind the pod and try a lower amount of prewinds.
I know this is possible with the old style pods, but I'm unsure about the newer pods. They are simpler and have a single peice internal core or something and thus are a little easier to use. I'm not sure if you can adjust the tension with them though. Chances are you can.
A couple guys on pbnation have qloaders on their bushys. Try finding them in the qloader thread in the loader section of the forum. They're good guys. Also, try looking at the pictures on qloader.com I think they have some pics of bushys there.Comment
-
Thanks for the help.Comment
Comment