Best Loader

[Kyle.Kimber]

Really I would say the Q-loader. I use a modded Revolution with the intellifeed which actually increase by feedrate by a few bps. The Q-loader though feeds 30pbs and is almost impossible to outshoot, however, the Q-loader has a low ball capacity and at some times can be tempermental. I'd suggest it to either senario players or people who just don't want to go through half a case of Wal-Mart paint a game.

[GT]

Meh, they have great customer service, but the best hands down would have to be AIC's (Qloader). They have the best customer service I've ever dealt with. Ricochet were good guys too when I needed them, but no one comes close to AIC.

I would hope so. How much are those Q loaders?

[GT]

I can outshoot a Revvy, but it only happens in long, high bps strings. The Revy is much lighter than my Halo, and works just as well with snapshooting. A revvy is also very simple, atleast with compared to some other hoppers.

I can understand a need for a faster hopper if you have a fast gun with no anti-chop system or if you are a back man that needs more firepower than 12 bps.

None truer

[White_Noise]

voted for the halo, because i have 2, and (call me crazy)but i dont trust sound activation.

im working on getting my revy working again though...would like to have a smaller hopper for some games.

[FSU_Paintball]

Man, I had no trouble outshooting my revvy. Stepping up to a Halo was like night and day. But its sluggishness wasn't the main problem - the biggie was its feeding consistency, which was crap... I'd get bursts of 4-5 and then a slight pause in my stream of paint. That's a problem.

Reloader B is the best on the shelf right now. The sound activation is more reliable than eyes, which can get dirty. I truly dislike the weight, battery life, and low max capacity of the loader though. Plus they're freakin expensive and the drive cones *always* break.

Dream hopper = consistent 20BPS revvy

I've got a VLocity on order. I'll be interested to see how that one stacks up after I hack down the neck a bit. Lightweight, high-capacity and 9V powered for the win!

[Arstron]

I still like my evolutions, but I belive in true semi also.

[animal]

I wish they could've included the warp in some way to see what the best one might be in that situation as well. (warps are a dying breed I know). I've run a Halo B on top of my warp since the halo B came out, and I've never outshot the halo when paired up with the warp on my 1.37 emag (even when messing around with hybrid). SOmetimes I wonder why I botherd with L10

I'm not saying the B is the best by any means, but I would like to know what the best possible hopper on top of that warp is so that there's no way I can ever outfire my max sustained feed rate. I can and have done it on a long string with an Xboard revy.

[RogueFactor]

These numbers are definitly interesting. I never would have guessed theyd turn out like this.

[evildead420]

i like my eggy, fits nicely with the warp feed

[JRingold]

I've had issues with just about every loader I've owned. Maybe I should just stick with stock class, but I even break the 10-ball tubes, so that's not a great soltion.

Halo's and Reloaders are battery hogs. If one gets a bettery pack for them, they are tolderable.

Even though the first generation eggs had extremely brittle shells, the new ones last pretty well. I've never had the issues with the Eggy that I've had with Halos and Reloaders...

[SpitFire1299]

These numbers are definitly interesting. I never would have guessed theyd turn out like this.

Yeah.. I was amazed to see how many people like the revvy over the eggy.

[chad326]

Halo b mod look

Id like to know what you all think is the best, stock off-the-shelf, loader on the market.

I will let every one know that halo b is the best this is something I did one day. I went to place in Orlando Florida at a place called sky craft, and I found a pully that is brass that fits perfect on the drive motor but is larger. This changed the speed of a stock halo b to be faster than the victory board. I took one halo b with out the victory board and one with the new pully and you could see a big differance. The victory board cost around $30.00 and this pully only cost me $0.50 cents. If I could find the way to put photos on this site I would put a photo of it on this listing. If someone can help I can send the photo to you and you can put it in the listing. It is 7/16 inch wide

[RogueFactor]

I will let every one know that halo b is the best this is something I did one day. I went to place in Orlando Florida at a place called sky craft, and I found a pully that is brass that fits perfect on the drive motor but is larger. This changed the speed of a stock halo b to be faster than the victory board. I took one halo b with out the victory board and one with the new pully and you could see a big differance. The victory board cost around $30.00 and this pully only cost me $0.50 cents. If I could find the way to put photos on this site I would put a photo of it on this listing. If someone can help I can send the photo to you and you can put it in the listing. It is 7/16 inch wide

Well, the numbers agree with you. If you were to combine the Halo and Empire Halo, the numbers account for more than 1/2 of all votes.

[Skoad]

still up as well rouge


EvoII would have been a very nice loader if the thing didn't self-destruct 2 weeks after buying it.

[RogueFactor]

still up as well rouge


EvoII would have been a very nice loader if the thing didn't self-destruct 2 weeks after buying it.

Yeah, I am still up Skod.

Ive used all but the QLoader. My Evo wasnt bad, just not as nice as the Halo. Id have a hard time voting.