AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
if you have a halo stype loader then it will jam. im going to the place in IL with reball in a week and i hope my reloader does not jam, and if it does i have the rip drive. i also have an ANS drive cone so i will see if that helps.
My Guns: chrome and black pump mag
-black 2k sniper 2
-32* vision imp with ups, ECS, reloader B
-was'd imp w/ i-frame and all ups, warp feed
-88/3000 and 48/3000 tanks
Unfortunatly the Reloader will have the same problems. The only thing that differs is the method of activation, eyes or sound, not actual operation procedure. Ripping does nothing for jams, you have to physically unjam the balls stuck due to the spring or beads.
I've been practicing at a Reball field about 7 or 8 days since Christmas. My Reloader B (Shocktech drive cone) hasn't had a jam yet going through 20ish pods per day, but most of the people that I know with Halos seem to have almost constant jams. Maybe my heavier drivecone moves the reballs around a bit easier than the stock plastic cone?
Go to Backwoods Paintball in Harriman, TN: Near Lenoir City, Knoxville, and Oak Ridge
Unfortunatly the Reloader will have the same problems. The only thing that differs is the method of activation, eyes or sound, not actual operation procedure. Ripping does nothing for jams, you have to physically unjam the balls stuck due to the spring or beads.
you can use the rip drive to make the drive cone go backwards to unjam the reloaderB
My Guns: chrome and black pump mag
-black 2k sniper 2
-32* vision imp with ups, ECS, reloader B
-was'd imp w/ i-frame and all ups, warp feed
-88/3000 and 48/3000 tanks
Comment