Whoo hoo! Got my warp

[buzzboy]

I got back from vacation today to have a late christmas. And as I already knew I was getting my warp from Mr. Liam Slattery. Now I have a few questions. I am having trouble. How do you mount this thing to a vert feed gun And also what is this piece for

[AGDlover]

the peace goes on one end of your hose and will slip on to your 90* adapter

To have the warp go your vert feed what I suggest doing is Take your plastic 90* and the part that has the screw and nut going though it just dremmal that off and slip the 90* onto your feedneck. Hopefuly you have a long enough warp hose.

[buzzboy]

Ok, thats what I thought I would have to do. I think I also might cut down my stock feed neck. Right now is is about 1.5". I also am going to have to get just a tinkle more tubing. The stuff I have was cut in half by the first owner.

[pachytriton]

If you're using a ule body or a deadlywind get the vert warp adapter from rogue. It's just a little angel threaded tube that the 90% adapter fits right over.

[buzzboy]

Sorry I didn't say, this is on a bko. I think I have it though. Pics soon.

[buzzboy]

When I put the two halves I have into the sockets there is about 2 inches gap that I need to fill. I hope the Building supply has the right tubing or I will be stuck to standard hopper for another weekend.

[buzzboy]

Well, it worked. I got some wire wrap from the auto parts and I used my warp today Shot great but I didn't get the sensitivity set right 'till after the day was over. No matter. Yippee.

[Troen]

get a mag, you can hook them up directly

[AGDlover]

When I put the two halves I have into the sockets there is about 2 inches gap that I need to fill. I hope the Building supply has the right tubing or I will be stuck to standard hopper for another weekend.

uhhh you put that 90 in the wong way shave off the screw and nut things and it'll slide into your feedneck fine

[buzzboy]

Check the other thread. I finallyt got it right.