where can i find a ten round for my

[Chris_automag_07]

i need a stock class feed for my ule body on my mag and i dont know if i would have to have one made or if someone makes one right now. i dunno, any help is appreciated.

[Lohman446]

Action markers made on for Angel threading. You *might* be able to hunt down one. When they were in business they were like $30. I had one on my pump mag.

[behemoth]

Action markers made on for Angel threading. You *might* be able to hunt down one. When they were in business they were like $30. I had one on my pump mag.

Now they're so hard to find, they're REDICULOUSLY EXPENSIVE.

- I know WWA drilled Arston's ULE to accept the phantom VSC block, that could be done too.

[JeepinCalifornia]

Chris- All depending on the degree of Stock Class you want to go, you may try these...
The first link is a pic, the second link will direct you to Palmer's site, scroll down half way through misc items to find the item... http://www.palmer-pursuit.com/images...er-tube-pc.jpg
http://www.palmer-pursuit.com/catalog/catalog.htm Ball counting slots, or something similar could probably be requested...
I've also seen where these warp adapters will work with Phantom(I believe) feed tubes, or others, perhaps: http://store.airgun.com/index.cfm?fu...&categoryID=19
For something that would mount to the body (or a new body with integrated SC!), you'd probably have to look into something custom, as Behemoth suggested.

[Phantom_Mag]

I got this one for my phantomag I built.

[neppo1345]

See if you can get a PTP warp feed adapter and run a 10 round tube into that...one of the guys at my field runs that setup...

[BeaverEater]

ya but phantom mag that clip is not considered stock class. it has to be gravity feed to be stock class not spring fed.

[warbeak2099]

I'd go with a warp adapter and stick a ten round tube into it. You probably will need a straight elbow in between the tube and the adapter. If you don't want the PTP adapter, buy Rogue's angel threaded warp neck.

[Phantom_Mag]

You take out one screw and its no longer fed like that, its very simply to put back and forth thats why i bought it, and you can see how many shots you have left.