AGD screw size question?

[kingpen509]

Well to give you a little backround I'm attempting to put a tac-one rail, ULE body, and Intelliframe together and for some reason my stock front screw (not the field strip screw) that goes into the ULe body wont catch I dont know if anyone else has had this problem when adding a thicker rail but I think I'm goint to need a longer bolt.

So here is my question what is the threading on the stock bolt and what is the length?

I probably only want to go a quarter inch longer.

Thanks

-Dustin

[KayleAGD]

Well to give you a little backround I'm attempting to put a tac-one rail, ULE body, and Intelliframe together and for some reason my stock front screw (not the field strip screw) that goes into the ULe body wont catch I dont know if anyone else has had this problem when adding a thicker rail but I think I'm goint to need a longer bolt.

So here is my question what is the threading on the stock bolt and what is the length?

I probably only want to go a quarter inch longer.

Thanks

-Dustin

10/32

[kingpen509]

Is it 3/4 of an inch long?

[PBCapo]

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=415&categoryID=95

[marpat]

what is the threading for this screw?

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=243&categoryID=16

thanks!

[PnueMagger]

look for 10/32 machine thread screws. There are a ton of different heads to choose from. they are like 14 cents a peice @ a hardware store.

[marpat]

look for 10/32 machine thread screws. There are a ton of different heads to choose from. they are like 14 cents a peice @ a hardware store.

sorry should have been more specific.. that is a different thread size than the vert asa screw.. the one i linked to is the vert asa screw.. seems to be a larger thread than the 10/32 ones.