Custom Anodizing ??

[REDRT]

Anotech did my Viking.. Took them 5 months!

Use FBM or PK Selective. Didn't PK do the X-Mags?

I know they did the fancy Emags. Most likely did the X's also.

[Carbon Blue]

to those that got there mag bodies anodized what did you guys do about the ring and clip that is inside the body? I have heard that this will melt in the anodizing process. how do u remove it?

[minimag03]

http://www.precisionpb.com/

I'll run with precisionpb.com. Great price and just look at the markers in there gallery. B-E-A-UTIFUL

NO! I had my frame done there and it's the worst job I have EVER seen. Just NO!

[REDRT]

to those that got there mag bodies anodized what did you guys do about the ring and clip that is inside the body? I have heard that this will melt in the anodizing process. how do u remove it?

On the karta it is easy to remove it. A light clip and a metal ring. I forgot to remove it when I sent it to A+. So I called A+ to tell them to remove it before they anodized it. They didn't, but it didn't melt. I made sure it was out when it what to PK.
A ULE body is difficult. I know Tuna posted something about it being next to impossable and only a few people could even do it.

[Carbon Blue]

awesome! ive got a karta body but i have no idea where to start? do i start from the underside of the body??

[Loguzzzzzz]

Try HERE!

Check out the link below. It is on Deadlywind's website and deals with this issue.

Read here for ring and clip removal

[Baby Huey]

It seems I am in the minority, but I had a great experience with A+ Anno. They did an ice fade where it is a continuous blue fade from back (medium blue) to the middle (light blue) and the front (clear ) on one of my shockers. I priced the same job at FBM and one other place (cant remember now) and they were all about the same ($20 difference from high to low). They communicated great with me. I was told two weeks and I had it back in my hands in 8 days. I had a special request with my new detents due to a thin outer wall and they did a great job.

I have no clue how to post pics here so here is a link to it on another site

http://www.shockerowners.com/attachment.php?attachmentid=5213

(I am not sure if it will work for you if you are not registered). Again, this is the only experience I have with any anno but I am very happy, price was fair, and I would not hesitate in using them again as I have the sweetest looking (and thats what is important of course ) stock shocker I have seen. My mag is sweet too, thanks rogue. Good luck and God Bless.

[REDRT]

I'm glad you got it the color you want. THere are several different dyes out there and while we are the only people that will take the time to try and match your color it isn't always possible to get it exact. Close to one person may not be be others. Obviously you weren't satisfied. Not that it matters but out of the 1000's of markers we do a year we only have a few (2or3) people who aren't satisfied. I would be willing to refund your money. Even though you trashed my company on line. Anodizing is not like paint, you can't mix and add different colors until you get a match. And it takes hours to re-do a part not a couple minutes. You will always get better results if get it done at the same place it was done origially because they are using the same dye and process. PK does excellant work, we get many of there customers because there service is usually slow. THe reason I started this company was because I sent something to them and it took several months to get it back and it was totally the wrong color. But let me know how much we charged you and I'll send you a refund. But please stop bad mouthing us online. We have 1000's of very happy customers.

Here is the current reply from A+ to me. If I do get a refund that I never asked for mind you. That would be nice.

My final thoughts on the matter: A+ vrs PK in my resent experiance. Just the basic facts.
1. A+'s 1 week vrs PK's 2 weeks
2.A+ not close at all on my color vrs PK's perfect color match and highly polished like the original parts
3.A+ was $14 cheaper w/shipping than PK's total cost with shipping.
4.A+ better comunication via email and phone than PK IMO
5.Both places friendly enough though on the phone
6.In the end only one place got the job done and done so I was happy.

Having friends, other ballers at the pb store and even just tonight walk up on my back porch to comment on it giving it a thumbs up= Priceless Thanks PK!!

[21jumpstreet]

A+

It seems I am in the minority, but I had a great experience with A+ Anno. They did an ice fade where it is a continuous blue fade from back (medium blue) to the middle (light blue) and the front (clear ) on one of my shockers. I priced the same job at FBM and one other place (cant remember now) and they were all about the same ($20 difference from high to low). They communicated great with me. I was told two weeks and I had it back in my hands in 8 days. I had a special request with my new detents due to a thin outer wall and they did a great job.

I have no clue how to post pics here so here is a link to it on another site

http://www.shockerowners.com/attachment.php?attachmentid=5213

(I am not sure if it will work for you if you are not registered). Again, this is the only experience I have with any anno but I am very happy, price was fair, and I would not hesitate in using them again as I have the sweetest looking (and thats what is important of course ) stock shocker I have seen. My mag is sweet too, thanks rogue. Good luck and God Bless.

I sent my xmag in to A+ There going to do a Tequilla Sunrise fade >I'll let everyone know how it turns out ??

[cowboy_00]

Not just anno anymore.

Anyone ever seen a Black Chromed paintball marker?
you will in about 2 months.

A buddy of mine who just opened a polishing and chroming shop for sport bikes is going to try to black chrome my emag for me. I think it will look sick as hell as ive never seen anything like it.

its the Black-Sheep Mag!!


Dan "Cowboy" Yochelson
Sprye Bane Scenario Paintball Team.

and yes my paintball gun has a bed right beside mine.